| Slant Six Forum https://slantsix.org/forum/ |
|
| Slant six electronic ignition module melting https://slantsix.org/forum/viewtopic.php?t=35331 |
Page 1 of 1 |
| Author: | bossanova5 [ Wed May 13, 2009 8:53 pm ] |
| Post subject: | Slant six electronic ignition module melting |
Hello all, I have a 65 Valiant convertible I did the electronic ignition conversion to a few years back.I don't drive the car often but today after taking it for a spin I noticed that the it's dripping the black silicon or whatever that black stuff is on the underside of the module all down the inner fender wall. The module still works but is very hot to the touch.It's an original mopar module taken from a donor car years ago.I appreciate any and all input Thanks for your help in advance |
|
| Author: | SlantSixDan [ Wed May 13, 2009 8:56 pm ] |
| Post subject: | |
Replace old module with new module. Use a good brand (Standard-BlueStreak, #LX100 for 5-pin module, LX101 for 4-pin). |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|