Are these large "O" rings available for my 8 3/4" axel? These rings look a little flat, although they still seal, they are getting old.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Need Replacement "O" rings for Green brand Barings https://slantsix.org/forum/viewtopic.php?t=35461 |
Page 1 of 1 |
| Author: | wjajr [ Fri May 22, 2009 1:20 pm ] |
| Post subject: | Need Replacement "O" rings for Green brand Barings |
Are these large "O" rings available for my 8 3/4" axel? These rings look a little flat, although they still seal, they are getting old.
|
|
| Author: | SlantSixDan [ Fri May 22, 2009 3:04 pm ] |
| Post subject: | |
I don't know for sure, but my guess is they are ordinary round-section O-rings, and the flat appearance comes from their having taken a set (cooking in one compressed position for a long time). Should be able to replace with ordinary open-stock O-rings. If can't find locally, get thru www.smallparts.com . Pick your rubber compound carefully. Viton or Buna-N or Neoprene should be good picks; silicone would not be wise. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|