Hello....DO NOT buy remanned carb....(this is from experience)
DO contact SlantSixDan on this board for a carb or... there is a lot of absolute people here that will help you out
| Slant Six Forum https://slantsix.org/forum/ |
|
| time for a new carb? https://slantsix.org/forum/viewtopic.php?t=35557 |
Page 1 of 1 |
| Author: | makgreens [ Wed May 27, 2009 11:45 pm ] |
| Post subject: | time for a new carb? |
well as my luck would have it i might be in need for a new carb after much frustration and head scratching myself and a few others figured out what was wrong with my car something inside the carb was not putting out enough gas and we thought this was gonna be an easy fix well the background on the carb in the car is that it was recently "rebuilt" well we get a rebuild kit and proceed to take it apart theres something wrong according to the diagram the carb is missing 1 spring and 3 other odds and ends well we manage to make a spring from another carb work and go on to no avail there is still a constant hesitation in the carb all three adjustment points on the accelerator pump were tried...nothing oh and the other parts we are missing...they dont sell seperate or even in a kit my idea was to bite the bullet and buy a remanned one since im going to daily drive this care my buddies is to hit the junk yards and start looking for parts...cheaper but in reality not positive we can get whats needed and not sure it will be reliable should i just buy a new carb? or should i try and fix it for cheaper but maybe not longterm? and any suggestions or advice on the holley 1920 would be greatly appreciated |
|
| Author: | dusty72 [ Thu May 28, 2009 7:27 am ] |
| Post subject: | carbs |
Hello....DO NOT buy remanned carb....(this is from experience) DO contact SlantSixDan on this board for a carb or... there is a lot of absolute people here that will help you out
|
|
| Author: | 66aCUDA [ Thu May 28, 2009 7:35 am ] |
| Post subject: | |
I second buying from Dan. I bought a NOS carb from him for about what you would pay for a POS Reman carb . Frank |
|
| Author: | makgreens [ Thu May 28, 2009 10:27 pm ] |
| Post subject: | |
well we fiddled a little more today and got it running decent but theres still hesitation and every once and awhile a back fire as long as u play with the gas a bit till it gets up to speed your good to go ill probably be looking for a super 6 intake cause i have like three 2 barrel carbs i know are good and i can use |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|