Slant Six Forum
https://slantsix.org/forum/

68 Barracuda emergency
https://slantsix.org/forum/viewtopic.php?t=35640
Page 1 of 1

Author:  68barracuda [ Mon Jun 01, 2009 10:53 pm ]
Post subject:  68 Barracuda emergency

Hi All

Where can i find a supplier of oem replacement - read restoration - bulkhead connectors for this beast please

had a look at:

YearOne
Mancinni
Paddock
Bluestar Spares
Pentastar Parts
Summit

:shock: :shock: :shock: :shock: :shock: :( :( :( :( :( :( :(

Author:  HardCharger [ Tue Jun 02, 2009 12:00 am ]
Post subject: 

Perhaps try searching Mopar bulkhead on Ebay, there are some out there.

Author:  SlantSixDan [ Tue Jun 02, 2009 12:38 am ]
Post subject: 

Hoogeeze…seems to me I saw a vendor offering those not long ago, now I just need to figure out who it was...I do see a few on eBay.

Author:  HardCharger [ Tue Jun 02, 2009 1:09 am ]
Post subject: 

I knew of a specific seller on Ebay that was resonable and had all kinds of Mopar connectors including those bulkhead pieces but now I can't find anything on em and the search results does not include that seller...

Here we go...

Ebay Seller Hoover Auto Parts rob 1426

Author:  wjajr [ Tue Jun 02, 2009 12:49 pm ]
Post subject: 

About 15 months ago, I purchased a complete NOS (all four sections) bulkhead connector for my 1967 Dart from Evans Wiring Harnesses, 8835 Parson Rd., Erie, PA 16509. I have misplaced his phone number.

Author:  68barracuda [ Tue Jun 02, 2009 7:06 pm ]
Post subject: 

thanks for the replies so far guys as an interim i got a reasonable neat set of another 68 - will keep my eyes peeled - one guy on epay wants 150ish USD for all four pieces plus new spade connectors :shock:

Author:  HardCharger [ Tue Jun 02, 2009 9:25 pm ]
Post subject: 

Quote:
thanks for the replies so far guys as an interim i got a reasonable neat set of another 68 - will keep my eyes peeled - one guy on epay wants 150ish USD for all four pieces plus new spade connectors :shock:
Yeah thats seems real high. I thought I got reamed at Mopars at the Strip several years ago but if memory serves me right I only paid (only LOL) 220.00 for the bulkhead, the 3 specific connectors, the related spades as well as both battery cables... This was for my 67 Dodge Charger which I no longer have.

Author:  68barracuda [ Wed Jun 03, 2009 2:38 pm ]
Post subject: 

The gentleman who gave me this part actually gave me a complete 68 cuda harness in amazingly good condition 5 wires need replacement - the last 4 inches to the left headlight - strangely the connectors are intact and the wire running to the starter relay - these wires seem to have been exposed to heat, not overheated due to a short

wire is pliable connectors clean

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/