Slant Six Forum
https://slantsix.org/forum/

3/8ths vs 5/16ths line?
https://slantsix.org/forum/viewtopic.php?t=35742
Page 1 of 1

Author:  Andy's GT [ Sun Jun 07, 2009 3:18 pm ]
Post subject:  3/8ths vs 5/16ths line?

hey all, working on redoing the fuel line, i eventually plan on running a 4bbl with a well built slant, currently have a 3/8th setup when i get to the 4bbl will i need 3/8ths? thanks

Author:  dakight [ Sun Jun 07, 2009 3:28 pm ]
Post subject: 

I don't believe you'll *need* 3/8ths line but if you already have it there is no harm in keeping it that I know of.

Author:  raPoM [ Sun Jun 07, 2009 3:55 pm ]
Post subject: 

You do not need the 3/8's line. My last small block car was putting 423 h.p to the wheels running the stock 5/16's line.

Author:  Andy's GT [ Sun Jun 07, 2009 5:10 pm ]
Post subject: 

ok thanks, i have the 5/16ths sending unit, but figured as long as im doing the whole fuel system over, may as well do it right if i need to eventually, just put together a 4ish year plan to get it where i want it, im counting on quite a raise the 4th year hahaha....crossing my fingers...

Author:  SlantSixDan [ Sun Jun 07, 2009 11:02 pm ]
Post subject: 

The 5/16" line is more than plenty and will reduce the workload on your fuel pump.

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/