| Slant Six Forum https://slantsix.org/forum/ |
|
| Hurst floor shifter ? https://slantsix.org/forum/viewtopic.php?t=36490 |
Page 1 of 1 |
| Author: | USAJon [ Mon Jul 27, 2009 6:01 pm ] |
| Post subject: | Hurst floor shifter ? |
is there one for the slant six auto..were building one..thanks |
|
| Author: | slantfin [ Fri Aug 07, 2009 8:47 am ] |
| Post subject: | |
I got a Hurst shifter along with a bum 4-speed. I sent it to $Year$one$ for their pricey rebuild- to their old address. 6 months later it returned through USPS, by which time I had bought a new replacement from http://www.summitracing.com/ for less than the rebuild. That's my story, in short. New one works fine. They have them for automatics as well, PN HUU-3160009, for example. |
|
| Author: | slantzilla [ Fri Aug 07, 2009 6:23 pm ] |
| Post subject: | |
For the auto trans your choices are almost limitless. Any auto shifter Hurst makes will work with a 904 pretty much. I am partial to the Quarterstick myself, but have also used a Promatic 2. If you want the height of cool track down a set of Lightning Rods. 
|
|
| Author: | rock [ Sat Aug 08, 2009 6:14 am ] |
| Post subject: | Just as 'zilla says, Ihave used both and now use Promatic 2 |
No need to get fancy..just as ''zilla reports, the quarterstick and promatic 2 work great...I went from 904 to a 727 now and use promatic 2. Kinda wish I had the quarterstick back but not enough to undo the promatic and be sure my kickdown is just right. The kinda want to is just because I can't ever leave well enough alone, not perfomrance. rock '64d100 |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|