Slant Six Forum
https://slantsix.org/forum/

Mod'n the Drivetrain, Trans Conversion & Disc Brakes
https://slantsix.org/forum/viewtopic.php?t=36517		 Page 1 of 5
Author:  MiDi [ Wed Jul 29, 2009 8:54 pm ]
Post subject:  Mod'n the Drivetrain, Trans Conversion & Disc Brakes
i'm replacing the all this stuff

leaf springs - going with 66 cuda formula s 6 leaf

rear - the 7 1/4 is going by by, in its place is a 8 3/4 323 open

torsion bars - i'm sticking in duster 340 ones

trans - it's dead good by push button haylo the 230

breaks - what brakes! i'll scrap my 9" drums replacing them with b body disc and a proper power booster bractet

i'm running 14 x 7 steelies

here is a few picts of my progress, been scrubbing and painting my butt off

much more to coem durting this process, btw i am doing this in 1 week and getting the noz setup with a total seprate fuel line ....

thanks ED!


bell housing

Image

fork

Image

all new syncros and new gears of my choosing!

Image

before, the after will be uploaded tomorrow

Image

my work area with painted parts, 3 coats primer 4 coats paint

Image

painting

Image

a bath before blast

Image

primered and ready for paint, check out that z bar its re-inforced!

Image

new tach

Image
Author:  Aggressive Ted [ Thu Jul 30, 2009 11:23 am ]
Post subject: 
Midi,

You have any more 7 x 14 steelies in small bolt? I need two.
Author:  raPoM [ Thu Jul 30, 2009 11:45 am ]
Post subject: 
So your selling the slots? :lol: I cant wait for more pictures.
Author:  Reed [ Thu Jul 30, 2009 12:35 pm ]
Post subject: 
sweet! Keep it coming! Glad to see you are putting more whoa with your go.
Author:  MiDi [ Thu Jul 30, 2009 10:58 pm ]
Post subject: 
Quote:
Midi,

You have any more 7 x 14 steelies in small bolt? I need two.
i have the 4 for my car, my work sells them for (blasted and painted for 75.00 ea ..it's a very rare wheel and we sell tons @ that price)
the sbp are rarer that the lbp .. i'm going lbp i had to cut down my rear to fit in the huge rear tires i'm running!

2 of my slots are going to thor to replace the ones his lost in his accident, the other 2 are trade in's to wildcat .. i'm not gonna see a pay check anytime soon! .

oh wait i forgot this project is burning thru my overtime hours!

is this a borg warner sure grip with power lock ? .. why yes it is and its going in my rear! awesome!


Image

Image

tranny with fresh paint

Image

tomorrow i start assembling the disc breaks and hopefully randy and ed are gonan build up my shifter or help out as promised.. going hurst!



edited beacuse my typing sux
Author:  HardCharger [ Thu Jul 30, 2009 11:18 pm ]
Post subject: 
Lookin good!

:D
Author:  MiDi [ Fri Jul 31, 2009 8:02 pm ]
Post subject: 
tomorrow the fly wheel gets resurfaced and my new clutch gets built i'm having the guy that does the wldkat race car do the work.

i picked up my new calipers tonight so the project is moving forward

neil
Author:  MiDi [ Sat Aug 01, 2009 10:39 pm ]
Post subject: 
today i was gonna send thor down to the clutch shop but we got so busy it didnt happen i'll drop it off monday i should get it back tuesday morning, i'm using a 10" scalloped clutch. and this shift boot http://www.spectreperformance.com/#CATALOG.6285

later on i'll get it engraved with Marilyn's name on it.

i have a bunch of highly polished stainless plate steel so i'm gonna build a small box to house the shifter on the drivers side of the tunnel.
that way i will build it over my nice carpet and keet it intact and add more shiney stuff to the car.

randy and THOR got the trans body assembled today

tuesday i will have the aftermarket parts i need to complete this project.

can i make the race? we will see

she is in good company, there will be a 65 yellow GT next to her tomorrow!

Image


thanks for reading.

neil
Author:  Reed [ Sun Aug 02, 2009 7:11 am ]
Post subject: 
Image
Author:  VDART [ Sun Aug 02, 2009 7:40 am ]
Post subject: 
interested in the 14x7 sbp wheel also-- who makes it for them? Can you post a pic & will they make a custom offset? thanks Lawrence
Author:  MiDi [ Mon Aug 03, 2009 9:59 pm ]
Post subject: 
Quote:
interested in the 14x7 sbp wheel also-- who makes it for them? Can you post a pic & will they make a custom offset? thanks Lawrence
there has been some talk about that i should not do any work biz or post about stuff my work has on the forum .. so call me @ work and i'll be happy to talk about this stuff all day with ya.

the back shop and my tranny:

http://www.youtube.com/watch?v=E5cSRyIV8-k

mr hemi 4 speed aka randy w/ my trans:

Image

10" scalloped clutch before the clutch and flywheel went off to the shop:

Image

completed trans .. i went stock 3 speed shifter because my hurst setup need more fab and work:

Image
Author:  slantsixbob [ Mon Aug 03, 2009 11:29 pm ]
Post subject: 
its looking really nice man! keep up the pictures :)
Author:  MiDi [ Fri Aug 07, 2009 8:04 pm ]
Post subject: 
today i pulled my new UCA's and removed the old ball joints, i have been sick and slammed @ work so the project has been on hold most of this week. i still need to get my rotors turned and dig thru the upstairs for a non-pushbutton 63 / 64 GT cover plate ... for the dash.

next is cutting the floor and building up the new "HUMP" for the trans.
Author:  MiDi [ Fri Aug 07, 2009 9:43 pm ]
Post subject:  Re: replacing the bottom end .. lots of picts slow inet bewa
Quote:

btw i am doing this in 1 week
yeah right MiDi!

it's a hell of a lot harder & more expensive than u planned on.

sorry .. just talkingt o my self

this weekend it's on!

more picts soon!
Author:  00spy [ Sat Aug 08, 2009 5:02 am ]
Post subject: 
MiDi,
What kind of paint do you use ,and what is your process of putting it on ?
Lookin' great :D



Dave
Page 1 of 5 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/