| Slant Six Forum https://slantsix.org/forum/ |
|
| 14" wheel + stock hub caps? https://slantsix.org/forum/viewtopic.php?t=36733 |
Page 1 of 1 |
| Author: | carpdar [ Fri Aug 14, 2009 3:37 am ] |
| Post subject: | 14" wheel + stock hub caps? |
Hey, Is there a 14" steel wheel that could accept a pie dish hub cap from a standard 1964 valiant 13" wheel? I'm trying to retain stock appearance in conjunction with the suregrip rear end. |
|
| Author: | emsvitil [ Fri Aug 14, 2009 4:26 am ] |
| Post subject: | |
The dog dish hubcaps (center bolt area only) fit all the stock steelie wheels. (13,14,15) |
|
| Author: | carpdar [ Fri Aug 14, 2009 3:24 pm ] |
| Post subject: | |
awesome, thanks a bunch |
|
| Author: | emsvitil [ Fri Aug 14, 2009 4:52 pm ] |
| Post subject: | |
Don't forget that the 13" wheels are small bolt pattern (SBP) 5 on 4" |
|
| Author: | polara pat [ Fri Aug 14, 2009 7:33 pm ] |
| Post subject: | |
Quote: Don't forget that the 13" wheels are small bolt pattern (SBP) 5 on 4"
I'm running SBP 14"s that had stock dog dishes, now baby moons. It's a good look either way.
|
|
| Author: | carpdar [ Wed Nov 11, 2009 8:38 pm ] |
| Post subject: | |
I just got some 14" wheels from a 66' valiant that my brother and i crashed when we were 4 and 6 (knocked it out of gear on a hill :p) Either way, I've got a large selection of 14" tires so I'm going to try some BFG 205/70/14s and go from there.. My only question is.. is there a different max tire size between the front and back? My guess is the front would be better suited to a 195/75/14.. Thanks, Aaron |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|