Slant Six Forum https://slantsix.org/forum/ |
|
engines running but needs some help https://slantsix.org/forum/viewtopic.php?t=36742 |
Page 1 of 1 |
Author: | makgreens [ Fri Aug 14, 2009 10:53 am ] |
Post subject: | engines running but needs some help |
well after all the fun of adjusting valves we got the engine going good the problem were having is we now have an exhaust leak and when we get the idle set in park and shift to drive the car wants to die and usually does could the exhaust leak help cause this? im not sure where the leak is but im guessing its a donut that needs replacing but i might replace the exhaust/intake gasket anyway since its looks shot |
Author: | lowbudget [ Fri Aug 14, 2009 11:22 am ] |
Post subject: | |
Here's a link to the good exhaust gaskets thread. GPRS also sells the good intake/exhaust manifold gasket Exhaust gasket |
Author: | 65Dodge100 [ Fri Aug 14, 2009 2:01 pm ] |
Post subject: | Re: engines running but needs some help |
Quote: when we get the idle set in park and shift to drive the car wants to die and usually does
Not usually.could the exhaust leak help cause this? Quote: im not sure where the leak is but im guessing its a donut that needs replacing
There are no donut gaskets. There's a flat gasket where the exhaust pipe connects to the manifold. Another gasket where the two manifolds connect together. And the gasket at the head.There are pictures of them HERE. Gasket replacement is sometimes not-so straight forward. Expect broken bolts and studs. You can read all about it HERE. Danny |
Author: | makgreens [ Fri Aug 14, 2009 10:13 pm ] |
Post subject: | |
well theres no broken bolts or anything obvious the only free flowing exhaust or vapor is where the pcv valve is...my buddy broke it accidently so its vented into the atmosphere now but that wouldnt explain why the cab is heavy with fumes after maybe driving 10 miles if i could get it not to produce such fumes id be driving it everyday even if it is redneck driving(2 feet with an auto) |
Author: | Aggressive Ted [ Sat Aug 15, 2009 12:25 pm ] |
Post subject: | |
What year engine is this? Did you plug the PCV line to the carb? If you didn't plug the line, I don't see how the engine could run. That would be a huge vacuum leak. |
Author: | makgreens [ Sat Aug 15, 2009 10:41 pm ] |
Post subject: | |
the carbs all plugged up im guessing its the venting from the valve cover which makes it smell do these engines run warm? ever since i got this car its run warm and since i broke a piece of the a/c,heating hose and had to bypass everything it isnt running as hot |
Author: | Aggressive Ted [ Sat Aug 15, 2009 10:46 pm ] |
Post subject: | |
On hot days my engine runs right at the thermostat setting 180 degrees, the needle on the dash is at mid point. On cold days, 55 to 60 degrees, the gauge stays at the 1/4 to 1/3 point. |
Page 1 of 1 | All times are UTC-07:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |