Where is a good place to get a good deal on remflex rf6008?Amazon had a good deal, $32 shipped, but the crush the crap out of it when sending it.

Dave

_________________
81 Dodge D150
It looked easier in the book .

Don't know if you'll get a good "deal" but try dealing with Remflex direct
REMFLEX.COM Also out here at least some Napa stores are hooked up with them. My RF6008 came in a nice box from them with packing paper via UPS.

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

I ordered mine directly from Remflex. They were wrapped in plastic, bound to a thin piece of plywood, and they came through in perfect condition. This was last October, and the price was $37 AUD (around $26 US I think).

Roger

Roger,Remflex is made in US so I'm confused as to "AUD 37$" and you're listed as SoCal

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

Oops, I apologize - I am thinking of the Australian gaskets. Any reason why you're not using them?

Good question,I was in need of good gaskets and Aggressive Ted just happened to be singing the praises of Remflex at the time.They're not to far away from me so I had them overnite and now I sing about Remflex.
I'm sure if I'd gone with the Aussie gaskets I'd be happy with them also like many others here and either way it's a win/win for us slanters

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

how much for the remflex

_________________
Nothing beats a slant six
1987 D150

I contacted remflex last night and told them about Amazon shipping me 2 messed up gasket kits , and after I emailed them my invoice and everything, they said they would ship me a replacement.When it comes and it is the complete kit , I am going to get my refund from Amazon , and pretty much get a free gasket kit


Dave

_________________
81 Dodge D150
It looked easier in the book .

Dave,

I knew they would take care of you!

Now just don't over torque it and makes sure the surfaces are nice and shinny. I built a sanding board like Doc's with a 80 grit vertical sander sanding belt to clean the faces on the manifolds.

_________________
Aggressive Ted

http://cid-32f1e50ddb40a03c.photos.live ... %20Swinger


74 Swinger, 9.5 comp 254/.435 lift cam, 904, ram air, electric fans, 2.5" HP2 & FM70 ex, 1920 Holley#56jet, 2.76 8 3/4 Sure-Grip, 26" tires, 25+MPG