| Slant Six Forum https://slantsix.org/forum/ |
|
| Super six intake questiorn https://slantsix.org/forum/viewtopic.php?t=37213 |
Page 1 of 1 |
| Author: | Squigly1965 [ Wed Sep 23, 2009 6:36 pm ] |
| Post subject: | Super six intake questiorn |
there is some type of vacuum plunger attached to the end of the intake manifold. 2 bolts hold it on. it's right below where the throttle linkage bracket bolts down does this need to be active. can i just put a plate over the holes and call it good? my current application doesnt have any need for this. so bypassing would be great. here's some pics of where i'm talking about and thanks for any help here   [/img]
|
|
| Author: | DusterIdiot [ Wed Sep 23, 2009 6:50 pm ] |
| Post subject: | Egr... |
That's the EGR valve...use plate block off unless car needs to smog and must have original equipment. -D.Idiot |
|
| Author: | Squigly1965 [ Wed Sep 23, 2009 10:18 pm ] |
| Post subject: | |
EGR we dont need no stinking EGR so plate it is alrighty thanks a million |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|