On behalf of Exner Geek. He also included a picture of the drive mandrel and his balancer hub, but I didn't scan that.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Dry Sump oil pump mounting https://slantsix.org/forum/viewtopic.php?t=37511 |
Page 1 of 1 |
| Author: | Joshie225 [ Thu Oct 15, 2009 12:59 pm ] |
| Post subject: | Dry Sump oil pump mounting |
Anyone have pictures they would share of any slant six dry-sump oil-pump mountings? I'm considering mounting my pump to the power steering boss, but this makes the plumbing more lengthy. I have an Aviaid Series I 3-stage pump in case it matters or anyone cares. |
|
| Author: | Exner Geek [ Thu Oct 15, 2009 1:39 pm ] |
| Post subject: | |
I have a single stage Aviaid pump mounted on the passenger side off the engine plate. It is a little cozy on an early A body but minimizes the length of the hoses required. Most guys mount the pump on the other side and use a lot of hose. I am not sure what knid of plumbing is required with a real dry sump so maybe the drivers side is just as good. I am sure I have pictures but don't know how to post them on the internet. Could send you some if you are interested. |
|
| Author: | darrt wells [ Thu Oct 15, 2009 4:39 pm ] |
| Post subject: | |
Exner Geek, I wouldnt mind seeing a picture of the dry sump system and oil pans you guys have fabricated. |
|
| Author: | Joshie225 [ Thu Oct 22, 2009 5:15 pm ] |
| Post subject: | |
On behalf of Exner Geek. He also included a picture of the drive mandrel and his balancer hub, but I didn't scan that.
|
|
| Author: | DusterIdiot [ Thu Oct 22, 2009 7:05 pm ] |
| Post subject: | Nice! |
That's pretty cool... And thanks for sharing, now I know what my MSD crank trigger is going to look like when installed! -D.Idiot |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|