Slant Six Forum
https://slantsix.org/forum/

cam ??
https://slantsix.org/forum/viewtopic.php?t=37557		 Page 1 of 1
Author:  70valiant [ Sun Oct 18, 2009 8:52 am ]
Post subject:  cam ??
I have found a cam for sale and am curious if it will work well in a stock slant or what mods would be recomended to use it to its potental.

competition cam 268 high energy stage 1 brand name the part# 64-248-4 grind# cr6 268h-10 serial# g 8680

Thanks for any input

Phil
Author:  Joshie225 [ Sun Oct 18, 2009 9:35 am ]
Post subject: 
Looks like a 268° duration hydraulic lifter cam that hasn't been offered in years. Got the cam card or lift, duration and centerline info? Do you want to convert to hydraulic lifters and valve gear?
Author:  70valiant [ Sun Oct 18, 2009 1:42 pm ]
Post subject: 
The post on CL says he bought it brand new 25 years ago and never used it. No I'm not interested in converting to hydraulic valve train.

Thanks
Author:  Reed [ Sun Oct 18, 2009 1:50 pm ]
Post subject: 
Hmmm. How much does he want for it? I will be using a hydraulic valve train in my brother's Duster. It will be a street car, not a racer, but I wonder if this cam would be a good one for it?
Author:  Joshie225 [ Sun Oct 18, 2009 2:35 pm ]
Post subject: 
Reed,

It should be a good cam with about 9.5:1 compression and good intake and exhaust systems. You still have that big valve head right?
Author:  70valiant [ Sun Oct 18, 2009 3:42 pm ]
Post subject: 
http://utica.craigslist.org/pts/1372963655.html

Here check it out.
Author:  Joshie225 [ Sun Oct 18, 2009 3:54 pm ]
Post subject: 
Ad has already been deleted by the author.
Author:  Reed [ Sun Oct 18, 2009 4:17 pm ]
Post subject: 
Yep, still have the big valve head, but it looks like the ad has been deleted. I will assume it is sold. :x That's okay. I am going to try and get a stock hydraulic cam reground to a different profile.

Oh! He reposted it with pictures:

http://utica.craigslist.org/pts/1411150894.html

"dodge chrysler plymouth slant 6 competition cams 268h stage 1 for use with stock solid lifters this is a mild street cam to give your slant 6 a few extra horses it will fit all slant 6 engines from the 60's to the 80's it is brand new purchases for a project 20 years ago that was never finished tis is rare as they are not available new anymore it is still in the original package dnto303@yahoo.com "


I am too cheap to pony up $75 plus shipping for a cam when I can get the stock cam reground for $35 here in town. :wink:
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/