Hi there,
I've got a "warm" cam and I'm not sure about the valve clearances that have been recommended. Here's the cam card.
Does this look right?? Since valve clearances for a stock cam are 0.010" and 0.020" I'm not sure why this cam would have the same clearance for both intake and exhaust?? I'm thinking maybe this is a mistake and it should be 0.012" and 0.022" for this cam, but I don't know, I'm new to the world of cam speak.
Any advice is greatly appreciated.
Cheers, Jon.
P.S. I also see that the exhaust duration is wrong too, it should read 276.
