| Slant Six Forum https://slantsix.org/forum/ |
|
| Replacement wire harness? https://slantsix.org/forum/viewtopic.php?t=37838 |
Page 1 of 1 |
| Author: | Rogue [ Sat Nov 07, 2009 7:14 am ] |
| Post subject: | Replacement wire harness? |
Morning all! I've been doing some electrical inspections on the 74 Scamp and noticed that the previous owners have really done a number on all the wiring (interior and exterior). I'm curious to know, is there a company that makes replacement wire harnesses like Painless or any other company? Thank you very much for any help. *Rogue EDIT- Sorry my first searches didn't come up with much and than I searched again under "painless" and found a couple engine bay harness companies, but not dash wire harnesses. |
|
| Author: | coconuteater64 [ Sat Nov 07, 2009 8:12 am ] |
| Post subject: | |
I ran into what you ran into just this week. I tried making my own harness, thinking it's simple- I mean, it's just a couple circuits, right? Don't try this! I think Dan or somebody posted something on here about a guy who makes them, and they are loads better than something you'd get at EZwire, etc. |
|
| Author: | Joshie225 [ Sat Nov 07, 2009 9:47 am ] |
| Post subject: | |
You can get a dash harness for $599 from Year One. They only show the engine and forward light harness for V8 models though and it's $235. |
|
| Author: | SlantSixDan [ Sat Nov 07, 2009 7:18 pm ] |
| Post subject: | |
Forget that overpriced "universal" junk from "painless" (hah  ) . Get the dash and interior wiring from a donor car if you won't/can't spend Year One money on a new one. Get a new engine wiring harness from Evans Wiring — beautiful quality at a very affordable price.
|
|
| Author: | Rogue [ Sun Nov 08, 2009 7:23 am ] |
| Post subject: | |
Quote: Forget that overpriced "universal" junk from "painless" (hah
Thanks for the Evans Wiring link. ) . Get the dash and interior wiring from a donor car if you won't/can't spend Year One money on a new one. Get a new engine wiring harness from Evans Wiring — beautiful quality at a very affordable price.Joshie225- Thanks for the Year One info. I was just on their site and didn't even think to look for a wire harness. This site if full of helpful people and I appreciate that. Thanks *Rogue |
|
| Author: | wjajr [ Sun Nov 08, 2009 7:50 am ] |
| Post subject: | |
Mr. Evens was very helpful when I resurrected my wiring harness last year. Although I did not fully replace my harness, he did supply several hard to find parts, and molded rubber connectors with the correct wire color. He dose nice work. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|