| Slant Six Forum https://slantsix.org/forum/ |
|
| Band Sawed Slant 6 Head https://slantsix.org/forum/viewtopic.php?t=38066 |
Page 1 of 1 |
| Author: | Shaker223 [ Mon Nov 23, 2009 3:59 pm ] |
| Post subject: | Band Sawed Slant 6 Head |
Mods...maybe a sticky? I don't have the head any longer so these are the only pics I have. I sent it to member Lucky13. I think he may have passed as he was having health issues. He hasn't been on since last June. I even sent a letter to his home with no response.  Intake on the left. Notice the deck thickness.  Intake on the right  Intake on the right. Your machinest needs to be careful with hardened exhaust seats as there is not much material there. 
|
|
| Author: | adiffrentcity [ Mon Nov 23, 2009 5:32 pm ] |
| Post subject: | |
This is great stuff for anyone planning a port job. Thanks! |
|
| Author: | sandy in BC [ Mon Nov 23, 2009 7:09 pm ] |
| Post subject: | |
Cool stuff Shaker! Thanks! |
|
| Author: | Volare4life [ Tue Nov 24, 2009 10:38 am ] |
| Post subject: | |
ah very nice !! -Mike |
|
| Author: | 66aCUDA [ Tue Nov 24, 2009 3:16 pm ] |
| Post subject: | |
Do you remember what gereration head this was? Was the head stock or all ready messaged? Thanks for some great pictures. Frank |
|
| Author: | Shaker223 [ Wed Nov 25, 2009 5:23 am ] |
| Post subject: | |
It was a stock head that was untouched. It was a drool tube head but don't recall the casting #. |
|
| Author: | Matt Cramer [ Wed Nov 25, 2009 5:27 am ] |
| Post subject: | |
Thanks for posting this. It had me dreaming about porting the head on the Dart... literally. |
|
| Author: | lowbudget [ Wed Dec 02, 2009 9:24 pm ] |
| Post subject: | |
Thanks that give me the "courage" I needed to grab the die grinder and start a light port job. Great pictures |
|
| Author: | 1969ronnie [ Tue Dec 08, 2009 5:29 am ] |
| Post subject: | |
shaker, i know the head is gone but, any guess or measurment to how thick is the deck ? looks like 3/8" or more to me. thanks, ronnie |
|
| Author: | Shaker223 [ Tue Dec 08, 2009 9:39 am ] |
| Post subject: | |
Quote: shaker, i know the head is gone but, any guess or measurment to how thick is the deck ? looks like 3/8" or more to me. thanks, ronnie
It's probably closer to 1/2". Look at the diameter of the quarter vs the deck.
|
|
| Author: | Ssg Pohlman [ Sun Apr 07, 2013 4:42 am ] |
| Post subject: | |
I know I know, I keep reviving old threads but here goes... Currently on a ipad so I can't do the work I want but the photos will still yield measurements w a little work. The standard qtr is .955 inches. Or 1" without getting to technical, so then if some one laid out grid work or even used a guide on the photo by measuring the qtr first, one could use it to ID how thick the deck is etc. Now here's why I posted, in the top photo there is a pocket under both qtrs and one has a hole the other doesn't. What are the pockets? Coolant pockets? I'm brainstorming again and found these photos and the pockets are in the way! Lol. So educate the young in if anyone knows pls. |
|
| Author: | DusterIdiot [ Sun Apr 07, 2013 7:34 am ] |
| Post subject: | Yep. |
Quote: What are the pockets? Coolant pockets?
Yes that's a coolant passage, the one that doesn't have them is the end of the head (see the rocker shaft stand at the top of the "chunk").-D.Idiot |
|
| Author: | Ssg Pohlman [ Sun Apr 07, 2013 8:29 am ] |
| Post subject: | |
Well there goes that idea  , roaming the web and thinking I had thought of cold start injectors and long story short I was trying to incorporate as close to direct injection as we could get. Sometching like that was the thought but never mind. If the injector stuck in far enough and fire downward. An injecto like this  So that was the thought but with coolant in the way that would really mess things up. So onward with more wild thoughts... 
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|