| Slant Six Forum https://slantsix.org/forum/ |
|
| MP276 Cam specifications https://slantsix.org/forum/viewtopic.php?t=38152 |
Page 1 of 1 |
| Author: | Polara1974 [ Mon Nov 30, 2009 8:05 am ] |
| Post subject: | MP276 Cam specifications |
I have purchased a Mopar Performance P4286681 camshaft but i haven't received any card with it. Does anyone have a the card for this cam? Can you send me the specifications for it? Maybe a scan. Also, do you know the operating RPM for it? On the web i have found this information about it but I don't know if it is accurate: Duration 276/276 Duration @.50 ??? Lift .490 / .490 (1,5 rocker ratio) .523 / .523 (1,6 rocker ratio) Overlap 64 Lobe separation 106 Instaled Centerline 104 Intake Opens 34 Intake Closes 62 Exhaust Opens 66 Exhaust Closes 30 Intake Valve ash ???? Exhaust Valve Lash ???? Any help? Regards! Martin |
|
| Author: | Polara1974 [ Wed Dec 02, 2009 7:50 am ] |
| Post subject: | |
Anyone can help me with the missing data? |
|
| Author: | Joshie225 [ Wed Dec 02, 2009 7:59 am ] |
| Post subject: | |
Go about 1/2 way down this page and you'll get all the info Mopar put in the catalog. The lash numbers are there at least. |
|
| Author: | Polara1974 [ Wed Dec 02, 2009 9:46 am ] |
| Post subject: | |
I have found that the recomended valve lash from MP is: Intake .016 Exhaust .020 But I wanted to confirm all the other info, specially the cam events. |
|
| Author: | Joshie225 [ Wed Dec 02, 2009 6:46 pm ] |
| Post subject: | |
Lash is actually .028/.032" for that cam. Sorry I left the link out of my last post! http://slantsix.org/forum/viewtopic.php?p=195330 |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|