Slant Six Forum
https://slantsix.org/forum/

HEI coil bracket from Napa
https://slantsix.org/forum/viewtopic.php?t=38608		 Page 1 of 1
Author:  olafla [ Tue Jan 12, 2010 6:32 pm ]
Post subject:  HEI coil bracket from Napa
I found an E-core coil bracket in the Napa online catalog, but according to Napa, this part can only be purchased over the counter at your local NAPA Auto Parts store. There is a company called D&M Auto Parts that sell all Napa products online, it may be available there.
The bracket is not listed for any specific model E-core coil, and since many of those coil seem similar in size, it may be of universal fit. It is made by Echlin, and the Napa part number is ECH ICB22. You can see it in the Napa online catalog here. I hope this can be of use for those who don't want to make their own bracket. There is a lot of E-coil brackets out there, but new ones may be difficult to find!
Olaf

Image
Author:  coconuteater64 [ Tue Jan 12, 2010 6:38 pm ]
Post subject: 
I looked at that, but decided to build my own. All you really need is a couple 90* shelf brackets. I chose to over-engineer mine, but I plan on doing some off roading and don't want pieces flying off.
Author:  olafla [ Tue Jan 12, 2010 7:20 pm ]
Post subject:  HEI coil bracket from Napa
I totally agree, coconuteater64, I'm also making my own bracket, those coils are heavy! But I am sure there are slantsixers that for some reason don't like to fabricate stuff themselves, and since I found this item and since the HEI convertion is a hot theme, well - there it is! 8)
Olaf
Author:  armyofchuckness [ Sun Jan 17, 2010 7:03 pm ]
Post subject: 
Ooh. I might be interested in this! I have a coil mount from a Chevy Blazer that I was going to use, but it makes the coil stand up at the most awkward angle. I'll swing by Napa and check this out. Thanks for a good tip for us lazy guys. :lol:
Author:  the_shadow [ Thu Jul 07, 2011 7:44 am ]
Post subject: 
The catalog link doesn't work anymore. Does anyone have a part number for this coil bracket?
Author:  SlantSixDan [ Thu Jul 07, 2011 9:07 am ]
Post subject: 
Part number is right there in the first post in this thread.
Author:  the_shadow [ Thu Jul 07, 2011 10:19 am ]
Post subject: 
Wow I can't believe I missed that, i'm a dummy!
Author:  olafla [ Thu Jul 07, 2011 2:59 pm ]
Post subject: 
Hi, the_shadow.
Sorry about the link, it is obviously too old and no good anymore. If you make a search for 'coil bracket' in the Napa catalog, you get 13 hits, but none like the one shown, so it may not be available anymore.

Olaf.
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/