im shur that this one has been beat to death but, I have a 85 truck 225 that is stock exept carb. a 1920 and distributor a 72 points type
what brand/type should i use thnks for any help
| Slant Six Forum https://slantsix.org/forum/ |
|
| a dumb spark plug question https://slantsix.org/forum/viewtopic.php?t=38794 |
Page 1 of 1 |
| Author: | carlherrnstein [ Wed Jan 27, 2010 5:52 pm ] |
| Post subject: | a dumb spark plug question |
im shur that this one has been beat to death but, I have a 85 truck 225 that is stock exept carb. a 1920 and distributor a 72 points type what brand/type should i use thnks for any help
|
|
| Author: | Joshie225 [ Wed Jan 27, 2010 5:55 pm ] |
| Post subject: | |
NGK and Denso both make good spark plugs. Most of the rest are sub-par or worse. |
|
| Author: | theomahamoparguy [ Thu Jan 28, 2010 9:45 am ] |
| Post subject: | |
NGK: UR4 Denso: T14PR-U (resistor) IW16 (Iridium) Autolite: 26 (resistor) AP26 (Platiunum) APP (Double platinum) Bosch: HR98C+ (resistor) champion: RV17YC (resistor) These are some, there are more. I am using the AP 26 right now. (to the dismay of others on this forum I,m sure), I'd use the Bosch Plugs if I had a choice. |
|
| Author: | carlherrnstein [ Thu Jan 28, 2010 10:24 am ] |
| Post subject: | |
thank you, theomahamoparguy (sounds like the start of a song) just kidding  i had been using autolite 26 plugs .....thats what the autoparts guy said would be best but he has also led me wrong ie. remanufatured carburator.  anyway my truck just eats them alive, they get fould up bad thanks for the list |
|
| Author: | SlantSixDan [ Thu Jan 28, 2010 10:40 am ] |
| Post subject: | |
Autolite plugs are now crap from China. Champions have long been crap from America, who knows where they're made now. Bosch = crap from China or Germany (see? Even the Germans can make crap!) |
|
| Author: | carlherrnstein [ Thu Jan 28, 2010 10:47 am ] |
| Post subject: | |
Ya just look at the old volkswagen rabbit. I never saw one that wasnt a rust bucket. |
|
| Author: | AnotherSix [ Thu Jan 28, 2010 10:52 am ] |
| Post subject: | |
I strongly second using NGK or Denso. Even 10 years ago I was having problems with Champion plugs. In cars that sit for a couple of months without running, the car would miss and run terrible. The plugs looked fine but just didn't work. I would even use AC plugs after NKG or Denso, but since I have not used anything but NGK for the last 4 years I am not sure what they are like anymore. Along the same line I have been only using NTK oxygen sensors as well. They really seem to be the best. |
|
| Author: | Aggressive Ted [ Thu Jan 28, 2010 1:56 pm ] |
| Post subject: | |
The UR4 NGK's have been awesome in my engine, gapped at .045. Click on the red link for pictures. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|