Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Nov 28, 2024 7:43 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: 4.0 L slant block
PostPosted: Sat Feb 20, 2010 1:13 pm 
Offline
Supercharged
User avatar

Joined: Sat Feb 16, 2008 1:25 pm
Posts: 5611
Location: Downeast Maine
Car Model:
Stuff from Chrysler Engineering Salelisted under 6 cylinder engines here

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

Image


Last edited by wjajr on Sat Feb 20, 2010 2:17 pm, edited 1 time in total.

Top
   
 Post subject:
PostPosted: Sat Feb 20, 2010 1:30 pm 
Offline
TBI Slant 6
User avatar

Joined: Sun Dec 28, 2008 1:12 pm
Posts: 227
Location: Nashville
Car Model:
Not really 4.0.... I made the same mistake. search it out. :D

_________________
72 dart acquired 12/08 /6,holley2b, mopar perf intake, mopar perf header, cam, built motor,904 finally re-installed, 8.75....still needs sorting out.
99 dakota 318 5 speed reg cab picked up 9/09; Trans finally fixed! woohoo!


Top
   
 Post subject:
PostPosted: Sat Feb 20, 2010 2:24 pm 
Offline
Supercharged
User avatar

Joined: Sat Feb 16, 2008 1:25 pm
Posts: 5611
Location: Downeast Maine
Car Model:
All I know is Chrysler is cleaning their attic & basement of old stuff. I suspect this block was a prototype not unlike most of the other junk listed. Why would the price be over a grand for a regular old 3.7 /6 engine block?

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

Image


Top
   
 Post subject:
PostPosted: Sat Feb 20, 2010 2:43 pm 
Offline
Board Sponsor
User avatar

Joined: Sat Feb 08, 2003 2:37 pm
Posts: 4194
Location: CA
Car Model:
Those have been up there for several months, maybe even a year or more. The 4.0L slant part is just a mislabel / confusion with the Jeep motor. Further down the page they have a "4.0L Jeep Slant 6 Short Block".


Top
   
 Post subject:
PostPosted: Sat Feb 20, 2010 2:51 pm 
Offline
Supercharged
User avatar

Joined: Sat Feb 16, 2008 1:25 pm
Posts: 5611
Location: Downeast Maine
Car Model:
Pierre:
Quote:
Those have been up there for several months, maybe even a year or more. The 4.0L slant part is just a mislabel / confusion with the Jeep motor. Further down the page they have a "4.0L Jeep Slant 6 Short Block".
Oh… Didn’t look at no stinking Jeep Junk.

Just caught my eye while bottom feeding. I hadn’t been on that site for six months, or more since the new house project kicked off. Still a wee bit pricy…

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

Image


Top
   
 Post subject:
PostPosted: Sat Feb 20, 2010 7:00 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16792
Location: Blacksburg, VA
Car Model:
That looks like a standard production 225 aluminum block in nice shape. $1750 is a lot, but might be worth it to someone?? They are optimistic.

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
 Post subject:
PostPosted: Sun Feb 21, 2010 7:00 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
Quote:
All I know is Chrysler is cleaning their attic & basement of old stuff.
No, not really. That vendor isn't Chrysler. They've been trying to hawk that inaccurately-listed stuff for a couple of years now.
Quote:
I suspect this block was a prototype not unlike most of the other junk listed.
Nope, it's not. It's just an inaccurately-described aluminum 225. The "4.0" is because some dufus lumped it in mentally with the 4-litre Jeep six. There is no 4.0 aluminum slant-6.
Quote:
Why would the price be over a grand for a regular old 3.7 /6 engine block?
Um...because the vendor's deluded? Because sooner or later someone will come along with more money than brains? Because P.T. Barnum was right?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot] and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited