Slant Six Forum
https://slantsix.org/forum/

'73-'76 sway bar mounting?
https://slantsix.org/forum/viewtopic.php?t=39232
Page 1 of 1

Author:  SlantSixDan [ Tue Mar 02, 2010 1:53 pm ]
Post subject:  '73-'76 sway bar mounting?

Looks like one (and only one) set of lower control arms for A-bodies in '73 and '74. No listing for "W/ anti-sway bar" vs. "W/O anti-sway bar". So how was the bar mounted in '73-'76?

Author:  Eric W [ Tue Mar 02, 2010 3:36 pm ]
Post subject: 

Not sure, but probably something like the C body/isolated K frame B body set up, with the end links bolted to a bracket that wraps around the strut rod.

Author:  Reed [ Tue Mar 02, 2010 3:57 pm ]
Post subject: 

Image OOOOH OOOOOOH I KNOW!

Image

That's from my 74 FSM. Looks like a bracket welded onto the front of the lower control arm.

Author:  SlantSixDan [ Tue Mar 02, 2010 4:00 pm ]
Post subject: 

Okeh, but then the question is whether all of the '73-'76 LCAs have the bracket…given that there's no separate part number given for "with" vs. "without".

Author:  Reed [ Tue Mar 02, 2010 4:04 pm ]
Post subject: 

Nope. The LCAs on my brother's 74 Duster have no sway bar bracket. www.car-part.com lets you search for with or w/o sway bar brackets.

Author:  SlantSixDan [ Tue Mar 02, 2010 4:11 pm ]
Post subject: 

Interesting. FPC fail! :roll:

Wonder what else is missing from cars not factory equipped with sway bar.

(it's peanut butter jelly time…)

Author:  Reed [ Tue Mar 02, 2010 4:16 pm ]
Post subject: 

I would hazard a guess cars not equipped with a sway bar are missing two tabs welded to the LCA, the sway eliminator, two links, ten retainers, two sleeves, two supports, eight insulators, six nuts, four bolts, and four washers. :mrgreen:

Author:  SlantSixDan [ Tue Mar 02, 2010 4:19 pm ]
Post subject: 

Hold still while I throw this end wrench at you.

I said hold still, dangit!

:lol:

Author:  Reed [ Tue Mar 02, 2010 4:24 pm ]
Post subject: 

Image

Author:  Jopapa [ Mon Mar 08, 2010 2:02 am ]
Post subject: 

Quote:
I would hazard a guess cars not equipped with a sway bar are missing two tabs welded to the LCA, the sway eliminator, two links, ten retainers, two sleeves, two supports, eight insulators, six nuts, four bolts, and four washers. :mrgreen:
And a partridge in a pear tree.

Author:  zorg [ Tue Mar 09, 2010 9:44 pm ]
Post subject: 

I agree with Reed. I had to add all that recently...

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/