echowoods,that spec is from a 1967 plymouth service manual,I don't know about earlier models,and yes lou76 that is 10LBS of boost blowing on a mid 70s carter BBD-but don't ask WHY it took 4 years to tune it
| Slant Six Forum https://slantsix.org/forum/ |
|
| fuel sending unit range in ohms https://slantsix.org/forum/viewtopic.php?t=39638 |
Page 1 of 1 |
| Author: | echowoods [ Mon Mar 29, 2010 6:01 pm ] |
| Post subject: | fuel sending unit range in ohms |
greetings experts what is the fuel sending unit range in ohms for a 1964 dart gt with slant six? also what is fuel sending unit range in ohms for a 1966 chrysler 300? i am thinking of installing aftermarket fuel gauges in both vehicles. thanx i know somebody out there has the knowledge . |
|
| Author: | bigslant6fan [ Mon Mar 29, 2010 9:22 pm ] |
| Post subject: | |
8 ohms full,75 ohms empty,You can use "ford style" gauges. |
|
| Author: | Louise76 [ Mon Mar 29, 2010 10:26 pm ] |
| Post subject: | |
Is that photo of a turbo blowing into a carburetor? |
|
| Author: | echowoods [ Tue Mar 30, 2010 5:49 am ] |
| Post subject: | ohms |
is that for both vehicles i mentioned? |
|
| Author: | bigslant6fan [ Tue Mar 30, 2010 10:07 pm ] |
| Post subject: | |
echowoods,that spec is from a 1967 plymouth service manual,I don't know about earlier models,and yes lou76 that is 10LBS of boost blowing on a mid 70s carter BBD-but don't ask WHY it took 4 years to tune it
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|