Slant Six Forum
https://slantsix.org/forum/

Source for exhaust hangers, carb linkage clips
https://slantsix.org/forum/viewtopic.php?t=39929		 Page 1 of 1
Author:  phogroian [ Wed Apr 21, 2010 7:15 pm ]
Post subject:  Source for exhaust hangers, carb linkage clips
I need exhaust hanger brackets for a '75 Dart, and would like a few sets of kickdown/throttle/choke thermostat linkage clips. What is the best source?
Author:  KBB_of_TMC [ Thu Apr 22, 2010 10:16 am ]
Post subject: 
I just saw that the local Advance "Help" section had packs of such things - probably there are better sources, but less convenient.
Author:  SlantSixDan [ Thu Apr 22, 2010 1:26 pm ]
Post subject: 
Use new style exhaust hangers (round rod tack welded to pipe or muffler, rubber bushing bracket at floor pan).

Dorman and Echlin sell multi-packs of the clips.
Author:  Charrlie_S [ Fri Apr 23, 2010 5:18 am ]
Post subject: 
Quote:

Dorman and Echlin sell multi-packs of the clips.
Those clip packs do not have the small clips for the choke rod. Just went threw that. I haven't been able to find the small clip in a parts store. Found one on a old carb. That clip is still available from the dealer, but I can't find the part number, right now.
Author:  SlantSixDan [ Fri Apr 23, 2010 9:06 am ]
Post subject: 
Quote:
Those clip packs do not have the small clips for the choke rod.
The ones I've bought always have — and I wind up with a bunch of other-size clips I can't use. You can get the correct clip individually, too; Dorman # 118-005 or 118-025 depending on whether you need the RH or LH variety for the 1920/BBS/W or for the 1945/6145 (don't have which is which in front of me).
Author:  phogroian [ Fri Apr 23, 2010 9:29 am ]
Post subject: 
Thanks!
Author:  Charrlie_S [ Sat Apr 24, 2010 4:05 am ]
Post subject: 
Quote:
Quote:
Those clip packs do not have the small clips for the choke rod.
The ones I've bought always have — and I wind up with a bunch of other-size clips I can't use. You can get the correct clip individually, too; Dorman # 118-005 or 118-025 depending on whether you need the RH or LH variety for the 1920/BBS/W or for the 1945/6145 (don't have which is which in front of me).
I stand by my statement. The part numbers you list (which are the smallest in the "multi pak", are for a 5/32 inch rod. The slant six choke rod is 1/8 inch. It might be made to work, but will not fit properly.
The correct clip is Chrysler part number 2465560 which is superseded by 4041917

I just went through this about 2 weeks ago. Customer bought a 76 Valiant for his daughter, and I had to replace a missing choke t-stat.
Author:  1969ronnie [ Sat Apr 24, 2010 4:57 am ]
Post subject: 
hi, tom at accurateltd.com has slant 6 exhaust hangers and exhaust systems for slants. they are very helpful. ron
Author:  SlantSixDan [ Sat Apr 24, 2010 9:32 am ]
Post subject: 
Quote:
The part numbers you list (which are the smallest in the "multi pak", are for a 5/32 inch rod. The slant six choke rod is 1/8 inch. It might be made to work, but will not fit properly.
Okeh. They work for me.
Quote:
The correct clip is Chrysler part number 2465560 which is superseded by 4041917
That's for the 1945/6145? Or for the others?
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/