| Slant Six Forum https://slantsix.org/forum/ |
|
| Carter Carb ? https://slantsix.org/forum/viewtopic.php?t=40126 |
Page 1 of 1 |
| Author: | tsnyder21 [ Fri May 07, 2010 3:53 pm ] |
| Post subject: | Carter Carb ? |
I've got a 1bbl Carter carb with the #s 6-1697 cast in the side. I'm trying to find a rebuild kit and not having much luck. Any clues? Thanks - Tom |
|
| Author: | Aggressive Ted [ Fri May 07, 2010 3:56 pm ] |
| Post subject: | |
PM SL6 Dan and don't forget to looking the Engine FAQ carb section. |
|
| Author: | SlantSixDan [ Fri May 07, 2010 10:26 pm ] |
| Post subject: | |
That's just a casting number -- not helpful for specifying a rebuild kit. The carburetor number would've been on an aluminum tag secured to the carb by one of the bowl screws. Unfortunately, the tag can be left off during reassembly, or can break off. If no such tag on your carburetor, best post some pics. |
|
| Author: | tsnyder21 [ Sat May 08, 2010 7:32 am ] |
| Post subject: | |
After some searching, it's the same carb as shown in "dookdart's" post "B and B Carb" a couple of weeks ago. Edit... My local NAPA guy, who's found some obscure stuff for me in the past, ordered in their part # 2-5500 rebuild kit. By the exploded diagram in the kit it looks like the right one. Won't get to it until next week but think it's going to work. I'll pm dookdart |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|