Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 20, 2026 6:25 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: 904 Tail swap?
PostPosted: Mon May 24, 2010 4:10 pm 
Offline
EFI Slant 6
User avatar

Joined: Thu Jul 19, 2007 10:18 pm
Posts: 317
Location: Phoenix, AZ
Car Model:
Anyone ever try to swap a later 904 tail housing and shaft to early PB904?
I have one of each and tail bushing and seal on the PB are hard to find. Plus I would gain the benifits of a slip yolk and ditch the B&T.

,Cliff

_________________
'72 4 dr Dart
'63 4 dr Dart
Image


Top
   
 Post subject:
PostPosted: Mon May 24, 2010 4:22 pm 
Offline
Guru
User avatar

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:
This swap does not work.
The cable shift (60-65) 904 has two oil pumps, front & rear.
The rear pump is driven by the output shaft. It would take some major work to get the later output shaft to accept the rear pump's impeller.
DD


Top
   
 Post subject:
PostPosted: Mon May 24, 2010 4:33 pm 
Offline
EFI Slant 6
User avatar

Joined: Thu Jul 19, 2007 10:18 pm
Posts: 317
Location: Phoenix, AZ
Car Model:
You are correct sir, I now remember seeing the pin in the shaft that drives the rear pump. Just a thought. Any idea on other parts that may swap?

,Cliff

_________________
'72 4 dr Dart
'63 4 dr Dart
Image


Top
   
 Post subject:
PostPosted: Mon May 24, 2010 6:46 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed May 17, 2006 9:31 pm
Posts: 251
Location: Western Australia
Car Model:
Quote:
Plus I would gain the benifits of a slip yolk and ditch the B&T.
Another way to ditch the B&T is to modify the drive shaft. I've had the B&T joint cut off the front of mine and it's been replaced with a slip yoke and uni joint that bolts up to the original B&T flange on the trans. Does that make sense??
Here's a pic.

Image

_________________
62 Valiant, 225cid Slant 6/PB 904 with lots of good bits
Image
http://www.moparmarket.com/readersrides ... user=SV162


Top
   
 Post subject:
PostPosted: Mon May 24, 2010 6:54 pm 
Offline
EFI Slant 6
User avatar

Joined: Thu Jul 19, 2007 10:18 pm
Posts: 317
Location: Phoenix, AZ
Car Model:
Yes, I have seen this mod and have the parts list for it. Jut a PIA find my bushing and seal. Shopped hard and found a few places in town.
These guys have all my parts and a TC. http://www.transtarindustries.com/

,Cliff

_________________
'72 4 dr Dart
'63 4 dr Dart
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited