| Slant Six Forum https://slantsix.org/forum/ |
|
| Oil pick up https://slantsix.org/forum/viewtopic.php?t=40311 |
Page 1 of 1 |
| Author: | hellion_locdogg [ Wed May 19, 2010 3:33 pm ] |
| Post subject: | Oil pick up |
I have looked but maybe not hard enough. Where can I find a new oil pick up for a '63 slant. Also I have acquired an alum oil pump that looks(impeller) to be a high volume pump. How do I find out, I have checked part #s but don't know manufacturer. ,Cliff |
|
| Author: | Joshie225 [ Wed May 19, 2010 3:39 pm ] |
| Post subject: | |
No new oil pickups for early A bodies, sorry. Measure the thickness of the oil pump impeller to see if it's stock or not. Go about 1/2 way down this page to see: http://www.slantsix.org/articles/oil-pu ... report.htm |
|
| Author: | Doc [ Wed May 19, 2010 3:41 pm ] |
| Post subject: | |
No known sources for the correct 60-63 oil pick-up tube. Most parts suppliers try to "cross reference" into the 67 & up pick-up tube which is not correct for the early a-body oil pan. As for the die cast aluminum oil pump, the impeller should be .640 thick. (5/8") A medium volume pump has a 7/8" (.875) impeller and the HV is 1 inch thick. DD |
|
| Author: | hellion_locdogg [ Wed May 19, 2010 3:59 pm ] |
| Post subject: | |
Quote: No known sources for the correct 60-63 oil pick-up tube. Most parts suppliers try to "cross reference" into the 67 & up pick-up tube which is not correct for the early a-body oil pan. That's what I thought...  Thanks for the info gentleman.,Cliff 
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|