sold as scrap metal
There is something valuable?
| Slant Six Forum https://slantsix.org/forum/ |
|
| SuperSix at the cemetery https://slantsix.org/forum/viewtopic.php?t=40546 |
Page 1 of 2 |
| Author: | Rost310 [ Tue Jun 08, 2010 6:32 am ] |
| Post subject: | SuperSix at the cemetery |
sold as scrap metal There is something valuable? |
|
| Author: | Wesola78 [ Tue Jun 08, 2010 6:52 am ] |
| Post subject: | |
Wow! If you can, bet that intake manifold. |
|
| Author: | Rost310 [ Tue Jun 08, 2010 7:11 am ] |
| Post subject: | |
I'm afraid that will have to buy all this is entirely 
|
|
| Author: | slantsixbob [ Tue Jun 08, 2010 7:50 am ] |
| Post subject: | |
if its not too much for the whole car id buy it just for that manifold. what car is that on? |
|
| Author: | Rost310 [ Tue Jun 08, 2010 7:59 am ] |
| Post subject: | |
 Dart` 73 |
|
| Author: | gato [ Tue Jun 08, 2010 8:58 am ] |
| Post subject: | |
triple side drafts on long runners? r they SU's or some other carb? Bings? what other exotic stuff have they got over there? is there much slant 6 stuff? D~~~! |
|
| Author: | valiant1966 [ Tue Jun 08, 2010 9:11 am ] |
| Post subject: | |
I see a nice coil over there and possibly a good distributor to go with it. With the accessories on this engine, there is probably more than meets the eye here. 8 3/4 rear end? |
|
| Author: | rustyfords [ Tue Jun 08, 2010 9:27 am ] |
| Post subject: | |
Quote: I see a nice coil over there and possibly a good distributor to go with it. With the accessories on this engine, there is probably more than meets the eye here. 8 3/4 rear end?
I agree.....looks there's the potential for hidden goodies if a previous owner took the time to install that manifold. If it's just a few hundred bucks or less, I'd drag it home and see what was there.You can scrap the body after your treasure hunt is over and get some of your money back. |
|
| Author: | brian72valiant [ Tue Jun 08, 2010 11:19 am ] |
| Post subject: | |
check for posi rear check for rear suspension upgrades to aid in traction. check for an upgraded / good radiator ? I say if you can snag it up for under 500 bux then you can strip it / sell off the good parts you dont want , and scrap it again to possibly only be in a hundred or two bux to have that engine / tranny / rear axle if its a posi I had one of those carbs on an old motorcycle. mine was a su eliminator II and it was a super good carb. |
|
| Author: | Karasik87 [ Tue Jun 08, 2010 1:22 pm ] |
| Post subject: | |
that master cylinder looks like a disc brake cylinder. |
|
| Author: | Rost310 [ Tue Jun 08, 2010 2:11 pm ] |
| Post subject: | |
i have info, that this engine have 276 Camshaft Car don`t have any documents |
|
| Author: | stonethk [ Tue Jun 08, 2010 2:29 pm ] |
| Post subject: | |
I see headers too, looks like triple su's, also the linkage is already done. IMO-Take it, strip it, sell it back to salvage yard. |
|
| Author: | Rost310 [ Tue Jun 08, 2010 2:54 pm ] |
| Post subject: | |
$900 |
|
| Author: | brian72valiant [ Tue Jun 08, 2010 4:28 pm ] |
| Post subject: | |
msd ingintion coil |
|
| Author: | rustyfords [ Tue Jun 08, 2010 5:22 pm ] |
| Post subject: | |
Quote: $900
negotiate it to $750....strip it....then sell it back to them
|
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|