| Slant Six Forum https://slantsix.org/forum/ |
|
| HEI coil and housing... https://slantsix.org/forum/viewtopic.php?t=40789 |
Page 1 of 1 |
| Author: | hellion_locdogg [ Fri Jun 25, 2010 5:30 pm ] |
| Post subject: | HEI coil and housing... |
Found this on Ebay while shopping for my HEI parts. Price is good JUST for the heatsink housing. Not sure on the coil quality. http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT ,Cliff |
|
| Author: | Fopar [ Fri Jun 25, 2010 8:30 pm ] |
| Post subject: | |
Why not just go to wrecking yard, look for vortech chev, the coil and new style modual are mounted on the intake manifold. |
|
| Author: | hellion_locdogg [ Fri Jun 25, 2010 8:35 pm ] |
| Post subject: | |
I like the look of this better, it's cleaner. It's well into the 100's of degrees here now and I don't feel like surfing the junk yard. lol ,Cliff |
|
| Author: | Aggressive Ted [ Fri Jun 25, 2010 10:17 pm ] |
| Post subject: | |
Find out how many ohms it is first. |
|
| Author: | hellion_locdogg [ Fri Jun 25, 2010 10:53 pm ] |
| Post subject: | |
How much should it be? ,Cliff |
|
| Author: | Aggressive Ted [ Sat Jun 26, 2010 9:25 am ] |
| Post subject: | |
If you want to run with out the ballast resistor and still having the option to run the stock MOPAR ECU, 3 ohms. For running with a HEI, 1 ohm or a little over. For racing .5 ohms. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|