| Slant Six Forum https://slantsix.org/forum/ |
|
| Pressure plate torque settings. https://slantsix.org/forum/viewtopic.php?t=41143 |
Page 1 of 1 |
| Author: | JR [ Thu Jul 22, 2010 9:48 pm ] |
| Post subject: | Pressure plate torque settings. |
Pressure plate is 30ft lbs for 3/8" bolts right? Thats what it says in the Haynes book but they have been known to lie (small block rocker shaft torque settings). |
|
| Author: | DusterIdiot [ Fri Jul 23, 2010 5:22 am ] |
| Post subject: | Yes, but... |
30 ft/lbs for 3/8" bolt for clutch cover to flywheel...The standard bolts for the slant six covers are 5/16" so then it becomes 200 in/lbs... -D.Idiot |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|