| Slant Six Forum https://slantsix.org/forum/ |
|
| Good Slant 6 Build? https://slantsix.org/forum/viewtopic.php?t=41820 |
Page 1 of 1 |
| Author: | dodgecoronetwagon [ Wed Sep 08, 2010 1:49 pm ] |
| Post subject: | Good Slant 6 Build? |
Hi, ive been in the mopar hobby since i could talk. I am now 20 and daring to be different. I have a 69 coronet wagon, 318 and a 68 dart with a 6. I was wondering if i could get some performance tips. I have a 225 from an 80's van. the head is different than the older style. Whitch one is better? I want a good slant 6, maby a stroker. I need info and sorces. Thanks |
|
| Author: | dodgecoronetwagon [ Wed Sep 08, 2010 2:05 pm ] |
| Post subject: | |
I also found a company called aussie speed. they are trying to get a supercharger kit for slant 6 |
|
| Author: | Doc [ Wed Sep 08, 2010 2:27 pm ] |
| Post subject: | |
See the FAQ section & look for the engine build matrix for some ideas. http://www.slantsix.org/forum/viewtopic.php?t=38446 http://www.slantsix.org/forum/viewtopic.php?t=23314 |
|
| Author: | ceej [ Wed Sep 08, 2010 8:05 pm ] |
| Post subject: | |
Talk to Frank about the aussie speed equipment. He's the US distributor. Can't speak to the 80's engine. Depends on what your trying to do. I have a stroker based on a '74 BH Block. This tends to be an expensive way to go about making power. It also limits some applications where higher engine speeds would be desireable, like drag racing. For gobs of torque, it's useful. For high end, not so much. My next engine will not be a stroker. It's all fun though!  CJ 250" Stroker |
|
| Author: | 66aCUDA [ Sat Sep 11, 2010 5:48 am ] |
| Post subject: | |
Sent you a ( PM ) Private Message. Frank |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|