| Slant Six Forum https://slantsix.org/forum/ |
|
| Pushbutton 904 https://slantsix.org/forum/viewtopic.php?t=4192 |
Page 1 of 1 |
| Author: | David Rose [ Wed Sep 18, 2002 6:56 pm ] |
| Post subject: | Pushbutton 904 |
The lights on my pushbutton unit on my 64 dart just burned out. Where the heck is the plastic plug that houses the bulb on the pushbutton unit? Does anyone have a shop manual for '64 Darts for sale? Confused mopar fan godsownprototype@hotmail.com |
|
| Author: | GaryS [ Wed Sep 18, 2002 7:20 pm ] |
| Post subject: | Re: Pushbutton 904 |
I'm not sure about the Dart, but the single bulb on my Valiant shifter can be accessed by removing the plastic trim plate and moving the buttons aside. It can be reached from the front. lancer_41@excite.com |
|
| Author: | Doctor Dodge (Doug Dutra) [ Wed Sep 18, 2002 9:18 pm ] |
| Post subject: | Re: Pushbutton 904 |
Quote:
: I'm not sure about the Dart, but the single : bulb on my Valiant shifter can be accessed : by removing the plastic trim plate and : moving the buttons aside. It can be reached : from the front. The Darts are a little harder just because the PB faceplate is held down by the wiper and headlight switch. Use a small allen wrench to get the knob off the wiper switch and reach-up under the dash to push the release button on the headlight switch, this allows the knob assembly to be removed. (disconnect the battery or the headlights will be on) DD |
|
| Author: | 6boy [ Tue Jan 21, 2003 6:10 pm ] |
| Post subject: | |
So thats how u get the wiper switch knob off!!I broke the face plate on my 63 DART trying to get that thing off.And,you'll need to take off the tip of the parking pawl lever too.Mines held in with a standard screw.But,I dont know if its stock..........I want to find another face plate.Later.6boy..... |
|
| Author: | 63gtcv [ Sat Jun 21, 2003 9:16 pm ] |
| Post subject: | pushbutton 904 faceplate |
6boy,which faceplate do you need? Ihave several,but they do need re-chroming. If interested,e-mail me. bartman77373@yahoo.com 63gtcv |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|