Here is an A body with a Hellwig tubular anti-sway bar. This is a '68 A body with a '73 style K frame. Same basic setup will bolt right on to your '76 A body. They are basically the same under the skin.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Sway Bar Cross-Reference https://slantsix.org/forum/viewtopic.php?t=42464 |
Page 1 of 1 |
| Author: | rustyfords [ Mon Nov 01, 2010 1:08 pm ] |
| Post subject: | Sway Bar Cross-Reference |
I'm wanting to add a front sway bar to my 76 Valiant. Any recommendations on what will fit from different models or years? 76s seem to be scarcer than hen's teeth. |
|
| Author: | 65 dartman [ Mon Nov 01, 2010 1:38 pm ] |
| Post subject: | |
Factory sway bar from a 73-76 will fit. I'm sure there's aftermarket ones as well - just not familiar with them. |
|
| Author: | andyf [ Wed Nov 03, 2010 5:13 pm ] |
| Post subject: | |
Most everyone makes bars to fit that car. Firm Feel, Hellwig, Hotchkis, etc. Go to Jegs or Summit and enter your credit card info and you'll have a bar in your hands in a couple of days. |
|
| Author: | andyf [ Wed Nov 03, 2010 10:06 pm ] |
| Post subject: | |
Here is an A body with a Hellwig tubular anti-sway bar. This is a '68 A body with a '73 style K frame. Same basic setup will bolt right on to your '76 A body. They are basically the same under the skin.
|
|
| Author: | slantfin [ Fri Nov 05, 2010 5:20 pm ] |
| Post subject: | |
I like those shocks, andyf. |
|
| Author: | Joshie225 [ Fri Nov 05, 2010 6:46 pm ] |
| Post subject: | |
I have the same dampers and spindles, but different calipers and rotors. Oh, my torsion bars are a little smaller at 1.14" too.  Please excuse the rust. The car is sitting outside at the moment. 
|
|
| Author: | sethmcneil [ Mon Jan 24, 2011 11:53 pm ] |
| Post subject: | |
andy, josh- thats not a KH style two-piece rotor / hub assembly, is it? (with fancy caliper brackets, of course ) |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|