No
DD
| Slant Six Forum https://slantsix.org/forum/ |
|
| cam question https://slantsix.org/forum/viewtopic.php?t=42476 |
Page 1 of 1 |
| Author: | TurboNick [ Tue Nov 02, 2010 3:25 pm ] |
| Post subject: | cam question |
Does any company offer a roller cam for the 225? |
|
| Author: | Doc [ Tue Nov 02, 2010 3:29 pm ] |
| Post subject: | |
No DD |
|
| Author: | TurboNick [ Tue Nov 02, 2010 4:16 pm ] |
| Post subject: | |
Wow hmmm well I wonder if any custom cam place would be willing to make one |
|
| Author: | emsvitil [ Tue Nov 02, 2010 5:03 pm ] |
| Post subject: | |
|
|
| Author: | DusterIdiot [ Tue Nov 02, 2010 7:36 pm ] |
| Post subject: | Ed we need more butter... |
Quote: Wow hmmm well I wonder if any custom cam place would be willing to make one
You can have one ground if you can get them a blank...(know a machinist that can cut the price down on a "one off" billet blank?)There's another way around this...but you will have to use it for track only and check your build often to see if the blank has failed....  Do a search in the engine forum and see how many avenues we've taken to try and get there... -D.Idiot |
|
| Author: | TurboNick [ Wed Nov 03, 2010 10:38 am ] |
| Post subject: | |
im workin with a local machinist now to get a roller cam built. Hopefully we can get this going. I will keep everyone updated. |
|
| Author: | Doc [ Wed Nov 03, 2010 10:58 am ] |
| Post subject: | |
If you find someone who can hob the gear in the center of the SL6 cam... I would like to talk to them. (I would start the discussion around machining that feature, that gear takes special equipment and tooling so not many shops can do it) DD |
|
| Author: | TurboNick [ Wed Nov 03, 2010 11:14 am ] |
| Post subject: | |
alright i will take your advice thank you doc |
|
| Author: | dustertech2000 [ Sun Nov 07, 2010 7:29 am ] |
| Post subject: | |
i just had a custom cam made from lunati and they told me they could do a roller but it was going to be about 1,000 bucks. |
|
| Author: | TurboNick [ Mon Nov 08, 2010 12:20 pm ] |
| Post subject: | |
Thats not bad really. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|