Going from 1BBL to 2BBL

Unanswered topics | Active topics

Home » Board index » Tech Q & A » Engine

All times are UTC-08:00

Post new topic Reply to topic

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

trent

Post subject: Going from 1BBL to 2BBL

PostPosted: Wed Nov 17, 2010 2:52 pm

Offline

2 BBL ''SuperSix''

Joined: Tue Nov 09, 2010 10:54 am
Posts: 13
Location: Austin, TX
Car Model:

Hello all,

I'm ditching my stock 1-bbl intake manifold (on 1980 Volare) and am acquiring a 2-bbl manifold and a 2-bbl carb. Besides the manifold, 2-bbl carb and the 2-bbl carb gasket, is there anything else that I should replace, like gaskets, bolts, or other hard parts? I assume this is a common upgrade, so is there a good article out there for this upgrade?

Top

Profile

Reply with quote

Doc

Post subject:

PostPosted: Wed Nov 17, 2010 3:07 pm

Offline

Guru

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:

http://www.slantsix.org/articles/supersix/article.htm