| Slant Six Forum https://slantsix.org/forum/ |
|
| Where to buy/order Main Bearings for FORGED (pre-76) crank? https://slantsix.org/forum/viewtopic.php?t=42687 |
Page 1 of 1 |
| Author: | 1966DartConvertible [ Wed Nov 24, 2010 11:23 pm ] |
| Post subject: | Where to buy/order Main Bearings for FORGED (pre-76) crank? |
Hi there I just took the crank out and the bearings are not too bad but I thought since the engine is out and apart, might as well change them main bearings. My prob is trying to find main bearings for the early forged crank without any reduction i.e. -0.010 or -0.030 (i need standard ones) Tried Ebay, cant find any. Anyone can help me out? Cheers Syed |
|
| Author: | Joshie225 [ Wed Nov 24, 2010 11:34 pm ] |
| Post subject: | |
rockauto.com SEALED POWER Part # 4092M |
|
| Author: | GENT [ Wed Nov 24, 2010 11:35 pm ] |
| Post subject: | |
Did you call your local speed/machine shop? |
|
| Author: | 1966DartConvertible [ Wed Nov 24, 2010 11:51 pm ] |
| Post subject: | |
Quote: Did you call your local speed/machine shop?
No, as I dont trust the local machine shops here, rather buy ready-made from the Good Ole' US of A...
|
|
| Author: | 1966DartConvertible [ Thu Nov 25, 2010 9:56 pm ] |
| Post subject: | |
Quote: rockauto.com
Unfortunately, rockauto doesnt ship to Malaysia...SEALED POWER Part # 4092M By the way, Here is an Engine Kit from KINGS http://cgi.ebay.com/ebaymotors/ws/eBayI ... 4008wt_939 and here is a link for Mains from Vandevell http://cgi.ebay.com/ebaymotors/ws/eBayI ... _500wt_956 They both ship to Malaysia for about $20-45. Would you recommend the KING or Vandervell? Thanks Syed |
|
| Author: | Joshie225 [ Thu Nov 25, 2010 10:26 pm ] |
| Post subject: | |
I bought King bearings for my high speed 170 and the machine shop owner has used then in his 8000 RPM blown Chevy with good results. |
|
| Author: | 1966DartConvertible [ Thu Nov 25, 2010 11:51 pm ] |
| Post subject: | |
Quote: I bought King bearings for my high speed 170 and the machine shop owner has used then in his 8000 RPM blown Chevy with good results.
Hey im a lucky dude...Here is a CLEVITE kit on SALE for 25 bucks extra... and will ship to me... http://cgi.ebay.com/ebaymotors/225-CID- ... 5639e53d55 |
|
| Author: | walpolla [ Fri Nov 26, 2010 3:08 am ] |
| Post subject: | |
hello, If all that does'nt work for you, they are available from PP & R in Australia. Pricey,but closer to you for shipping - or perhaps packed in some hand luggage from a friend travelling ? Not all that far. You might like to check out the forum also. http://www.moparmarketforum.com/forum/index.php http://www.pentastarparts.com.au/sunsho ... tail&p=343 regards,Rod. 
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|