| Slant Six Forum https://slantsix.org/forum/ |
|
| 170 rods. Stock and not. https://slantsix.org/forum/viewtopic.php?t=42703 |
Page 1 of 1 |
| Author: | Joshie225 [ Fri Nov 26, 2010 4:45 pm ] |
| Post subject: | 170 rods. Stock and not. |
The stocker is 5.70" center to center. The pretty rod is 6.00" C-C. What do you thing the weight difference is? BTW, the next race 170 will use the rod on the right with a 1.25" CD piston, maybe an off the shelf Neon piston. The pin is the right size. Crud, forgot the picture! 
|
|
| Author: | ceej [ Fri Nov 26, 2010 4:51 pm ] |
| Post subject: | |
Before answering, what material is the "pretty" rod?  CJ |
|
| Author: | Joshie225 [ Fri Nov 26, 2010 4:56 pm ] |
| Post subject: | |
Quote: Before answering, what material is the "pretty" rod?
Some fancy kinda steel.
CJ |
|
| Author: | Fopar [ Fri Nov 26, 2010 5:04 pm ] |
| Post subject: | |
Is it an H beam ? |
|
| Author: | ceej [ Fri Nov 26, 2010 6:43 pm ] |
| Post subject: | |
OK, Mine were 240 Grams lighter than stock, so I tossed 250 up there. Those are even cleaner than the ones I had worked up for the hooptie!  CJ |
|
| Author: | Joshie225 [ Fri Nov 26, 2010 8:15 pm ] |
| Post subject: | |
Quote: Is it an H beam ?
Yes. It's also got a little hole the length of the rod to oil the pin.
|
|
| Author: | madmax/6 [ Fri Nov 26, 2010 9:40 pm ] |
| Post subject: | |
248.77 lighter.could get closer with better pics.Wilfred |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|