That's good, but where does the driver sit?
| Slant Six Forum https://slantsix.org/forum/ |
|
| slant six roll around https://slantsix.org/forum/viewtopic.php?t=42789 |
Page 1 of 1 |
| Author: | DadTruck [ Sun Dec 05, 2010 6:19 pm ] |
| Post subject: | slant six roll around |
this may have been covered before, if not,, I have a slant that I want to store, here are photos of using scrap 4x4 and 2x4 and wheels to make a rolling storage rack. http://www.flickr.com/photos/13718356@N ... 538178634/ |
|
| Author: | slantfin [ Sun Dec 05, 2010 7:33 pm ] |
| Post subject: | |
That's good, but where does the driver sit?
|
|
| Author: | olafla [ Sun Dec 05, 2010 10:42 pm ] |
| Post subject: | |
Don't matter where you sit, if you still hang on after the first turns and a steep downhill, you're the winner anyway!  (I made one years ago!) Olaf. |
|
| Author: | kipamore [ Sun Dec 05, 2010 11:09 pm ] |
| Post subject: | |
I've been using a shopping cart I stole from Home Depot for years. Kip |
|
| Author: | DadTruck [ Thu Dec 09, 2010 6:33 pm ] |
| Post subject: | Version 2 |
Ok, second version, added a seat and shifter,, looks fast... http://www.flickr.com/photos/13718356@N ... 566548414/ seat belt optional |
|
| Author: | wvenable [ Fri Dec 10, 2010 3:24 am ] |
| Post subject: | |
| Your horse power to pound ratio should be darn good! Try an ET calculator and see what numbers pop up!
|
|
| Author: | olafla [ Fri Dec 10, 2010 3:56 am ] |
| Post subject: | |
Here is another cool tool you can make with some plywood and some lengths of 2"x3". Olaf. |
|
| Author: | Rob Simmons [ Fri Dec 10, 2010 6:54 am ] |
| Post subject: | Re: Version 2 |
Quote: Ok, second version,
Very nice! That new garage is ALMOST too nice to work on cars in. added a seat and shifter,, looks fast... http://www.flickr.com/photos/13718356@N ... 566548414/ seat belt optional  I'd post some pictures of my garage, but it's not presentable yet. (And I've got secrets in there...    )
|
|
| Author: | DadTruck [ Fri Dec 10, 2010 8:51 am ] |
| Post subject: | |
that wood roll-over is a neat idea,, I'll file that one away. |
|
| Author: | wvenable [ Fri Dec 10, 2010 11:53 am ] |
| Post subject: | |
Rob, DT's garage is top notch. Matter of fact this garage is just for his slanted projects! He has another one for the everyday stuff! |
|
| Author: | DadTruck [ Fri Dec 10, 2010 3:37 pm ] |
| Post subject: | |
first time I have ever had a place just for projects, its going to be nice. Did the epoxy floor myself,, did a lot of research on that, if anyone is considering doing one of those, I'll tell what I learned. |
|
| Author: | Andy's GT [ Fri Dec 10, 2010 7:39 pm ] |
| Post subject: | |
i was gonna say, the floor looks nice! im hoping that after this years lease is up (june-ish) to find a place with a garage thats a little more sealed than the current one, granted, my last place all that remained of the "garage" (as oldblue can testify as he helped with my old coilovers getting in the way of the new gas tank issue last year) was a concrete pad with a cinder block border... |
|
| Author: | slantzilla [ Sat Dec 11, 2010 12:49 pm ] |
| Post subject: | |
Quote: I've been using a shopping cart I stole from Home Depot for years.
I bought a couple motors up by Detroit a few years ago. One was on a home built roll-around, the other was on the carriage from a shopping cart. Kip
|
|
| Author: | sandy in BC [ Sat Dec 11, 2010 2:04 pm ] |
| Post subject: | |
Around here we just use a P handle dolly and belt ratchets.  click to view full-version
|
|
| Author: | BUCKET 636 [ Sat Dec 11, 2010 5:48 pm ] |
| Post subject: | |
Awesome,always good to get new ideas. 
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|