| Slant Six Forum https://slantsix.org/forum/ |
|
| Head Gasket Compressed Thickness https://slantsix.org/forum/viewtopic.php?t=42989 |
Page 1 of 1 |
| Author: | Supercharged SL6 [ Thu Dec 23, 2010 6:50 pm ] |
| Post subject: | Head Gasket Compressed Thickness |
Any one no compressed thickness of aussie head gasket I emailed them and they could not give me a figure I believe felpro is .038. Any other brand available. |
|
| Author: | Charrlie_S [ Fri Dec 24, 2010 4:02 am ] |
| Post subject: | |
I have some NOS OEM steel shim gaskets available. Nominal thickness of .022 |
|
| Author: | terrylittlejohn [ Sat Dec 25, 2010 7:31 am ] |
| Post subject: | |
fel-pro is 0.034" and corteck is 0.040" |
|
| Author: | 66aCUDA [ Sat Dec 25, 2010 10:14 am ] |
| Post subject: | |
.038 and .042 depends on WHICH Aussie gasket Frank |
|
| Author: | Dart270 [ Sat Dec 25, 2010 8:43 pm ] |
| Post subject: | |
I got 0.046" for the Permaseal Aussie gasket with the really big bore. 0.034" for the Felpro. I think my other Aussie one (ACL) was around 0.044-0.45". Lou |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|