| Slant Six Forum https://slantsix.org/forum/ |
|
| 2bbl carb https://slantsix.org/forum/viewtopic.php?t=43398 |
Page 1 of 2 |
| Author: | Ryszard74 [ Thu Jan 27, 2011 5:02 pm ] |
| Post subject: | 2bbl carb |
OKAY LADIES AND GERMS AND EVERYTHING IN BETWEEN... i need help again... in the next 2 weeks im getting money so that i can continue my work on my 74 duster... NOW... ive seen a few 2bbl carbs on Ebay, i was wondering if anyone knew of a good place to get one. ALSO the kickdown linkages. and possibly the intake manifold... >.> i know "but mark your asking for sooooo much"... well i know... and i appreciate it... |
|
| Author: | slantzilla [ Thu Jan 27, 2011 6:57 pm ] |
| Post subject: | |
Watch the for sale section here. There's usually a 2 bbl intake and carb to be had. |
|
| Author: | Ryszard74 [ Thu Jan 27, 2011 9:45 pm ] |
| Post subject: | |
i already have the intake... i got that a while back. now its just linkages and carb. |
|
| Author: | Fab64 [ Fri Jan 28, 2011 11:12 am ] |
| Post subject: | |
Go to this link: http://www.slantsix.org/forum/viewtopic.php?t=43231 It will have a link to the eBay listing for a 1979 NOS Holley 2280 carb. I believe the original eBay listing expired, but click on the new link. It's a great carb, and a great price. Good luck. Roger |
|
| Author: | Ryszard74 [ Fri Jan 28, 2011 11:45 am ] |
| Post subject: | |
fab... i love you. thank you for the link. |
|
| Author: | Reed [ Fri Jan 28, 2011 11:47 am ] |
| Post subject: | |
NEW EBAY LINK I concur. I bought one of these carbs for my brother's van and it is a very good buy. I see he has bumped the quantity back p to ten. If so, then anyone who is looking for a NOS 2bbl carb for their slant should jump on this. |
|
| Author: | Ryszard74 [ Fri Jan 28, 2011 11:55 am ] |
| Post subject: | |
i will, i really hope it is still there in about a week... it would make my life so much easier * i wouldnt have to rely on arizona's junkyard pile* |
|
| Author: | Charrlie_S [ Fri Jan 28, 2011 4:38 pm ] |
| Post subject: | |
I bought one, and they sent two, so got a great price on the second one, rather then return it. One was a slant six carb, one was a V-8 carb. My neighbor, cam by two days after I got the carbs, and needed a good carb, so I sold him one of mine, and ordered a replacement, directly from him at an even better then the E-bay price. He cut me a deal since I had called him about sending me a carb for free, and offering to pay for it. |
|
| Author: | Ryszard74 [ Mon Jan 31, 2011 12:43 pm ] |
| Post subject: | |
well i just got my money, so now its the matter of paypal... -.- i hate paypal sooooo much... |
|
| Author: | BUCKET 636 [ Mon Jan 31, 2011 1:36 pm ] |
| Post subject: | |
Has anyone converted one of these carbs to a manual choke ? I have extractors/headers on my slant with no heat box and like the idea of a manual choke. I don't even really need a choke where i live,even in winter. |
|
| Author: | matt68 [ Thu Feb 03, 2011 11:40 am ] |
| Post subject: | |
Are all these carbs for a/t or manual? I wrote to the guy (Mark) and he says he knows nothing about carbs; he just has about 8,000 of them to sell. I'd hate to get a manual trans carb when i need a a/t! |
|
| Author: | Reed [ Thu Feb 03, 2011 12:03 pm ] |
| Post subject: | |
(1) Yes, these can be used with a standard manual choke setup. (2) M/T or A/T doesn't really make a difference on a slant six carb. |
|
| Author: | matt68 [ Thu Feb 03, 2011 2:08 pm ] |
| Post subject: | |
but won't a manual trans carb not have the trans kickdown linkage attachments? |
|
| Author: | Reed [ Thu Feb 03, 2011 2:18 pm ] |
| Post subject: | |
No. The throttle return spring and throttle attachment stud does double duty as the kickdown linkage attachment point. My carb didn't come with the throttle stud, so you will need to find/make your own, or buy THIS ONE |
|
| Author: | BUCKET 636 [ Tue Mar 15, 2011 5:23 pm ] |
| Post subject: | |
I have just received my 2280 as listed above. My question is,do i have to use the thick base gasket that is supplied with the carb or can i use a thinner one ? The thing is i have clearance issues under the bonnet on my AP6 Valiant with the aircleaner and riser i am using. |
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|