or something
, either it's cast iron or an aluminum block.Where did you find the numbers ? 24... would suggest a block after 62 (the aluminum block was made from 1960 to 1962) and they made around 45000 of them, but I might be 100% wrong here.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Numbers https://slantsix.org/forum/viewtopic.php?t=43451 |
Page 1 of 1 |
| Author: | Brussell [ Mon Jan 31, 2011 1:21 am ] |
| Post subject: | Numbers |
Hi, Looking at my engine block at these numbers what can you guys tell me...? Engine is red. 08026: 248343015 I've been looking on the internet and using search just hoping you have some extra info. like. My engine block is titanium or something so it's worth alot:P |
|
| Author: | lancer61 [ Mon Jan 31, 2011 2:29 am ] |
| Post subject: | |
or something , either it's cast iron or an aluminum block.Where did you find the numbers ? 24... would suggest a block after 62 (the aluminum block was made from 1960 to 1962) and they made around 45000 of them, but I might be 100% wrong here. |
|
| Author: | Brussell [ Mon Jan 31, 2011 2:39 am ] |
| Post subject: | |
On the engine block, just under where the manifolds are, I'd post a photo but because of the headders you can't see it. There is - in there somewhere, but I can't see it now it's too late I'll add it later. |
|
| Author: | lancer61 [ Mon Jan 31, 2011 2:58 am ] |
| Post subject: | |
Ok, in 1960-1962 it should be on the left side of the block, 63 on they put it on the right side front just below the head, so I guess it could be an aluminum block then. |
|
| Author: | hantayo13 [ Mon Jan 31, 2011 6:30 am ] |
| Post subject: | |
look under # 1 plug...top of block ...there are stamped numbers |
|
| Author: | Doc [ Mon Jan 31, 2011 8:51 am ] |
| Post subject: | |
248343015 is really 2463430-15? (look at it closer) This should be a 60-67 "three freeze plug" cast iron SL6 block... made form casting pattern "#15", which is somewhat later in the production run of these blocks. The stamping on the corner of the deck will tell us the year it was made. DD http://www.slantsix.org/articles/dutra- ... blocks.htm 
|
|
| Author: | Brussell [ Mon Jan 31, 2011 12:27 pm ] |
| Post subject: | |
Yes doc you are correct it is a 6 and not an 8. The other number is CC 225 10 12, what year does that mean it was made in...? and I'm guessing it means I have a cast Iron block with a aluminium head? |
|
| Author: | BUCKET 636 [ Mon Jan 31, 2011 3:52 pm ] |
| Post subject: | |
Where did you get the motor from ? I didn't think we had aluminium heads on our Australian slant 6's. |
|
| Author: | Brussell [ Tue Feb 01, 2011 4:24 am ] |
| Post subject: | |
Yeah I'm not sure, hoping someone can tell me from these numbers :/ |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|