Slant Six Forum
https://slantsix.org/forum/

PRICED What am I gonna do with these?
https://slantsix.org/forum/viewtopic.php?t=43993
Page 1 of 2

Author:  SlantSixDan [ Fri Mar 11, 2011 6:37 pm ]
Post subject:  PRICED What am I gonna do with these?

These are on my shelf in Michigan. Don't know who made them, or when, but think it was back when the slant-6 was still a current-production engine. Don't know that I've ever seen a set of headers with provisions for a factory automatic choke (and provisions for a heat-tube type automatic choke, too). Don't know what I'm going to do with them; headers are against my religious beliefs.
Image

Image


Image


Image

Author:  matt68 [ Fri Mar 11, 2011 6:55 pm ]
Post subject: 

Well, and this is just a thought...if they will work on my 1979 Plymouth Volare 225 super-six, you could give them to me at a great price......

Author:  Doctor Dodge [ Fri Mar 11, 2011 6:57 pm ]
Post subject: 

Interesting....
Based on looks, those are not going to fit an A-Body car...
Anyone have an idea on application? Maybe a truck or van?
DD

Author:  GTS225 [ Fri Mar 11, 2011 7:53 pm ]
Post subject: 

Hmmmmmm.....I wonder if they'd fit a '23 T kit car project I have in storage........... :?

Roger

Author:  madmax/6 [ Fri Mar 11, 2011 9:07 pm ]
Post subject: 

I allmost kinda like em.What size are the primeary tubes?They are strange,interesting,and very cuttable for my race car.Mark

Author:  slantzilla [ Fri Mar 11, 2011 11:01 pm ]
Post subject: 

There was a pair very similar to that on E-Bay a couple years ago. Nobody knew what they fit either.

Hooker used to make a truck header that looked kinda like that.

Author:  SlantSixDan [ Sat Mar 12, 2011 12:35 am ]
Post subject: 

Quote:
Interesting....
Based on looks, those are not going to fit an A-Body car...
You'd know better than I. What points of interference do you foresee? My notes from when I bought them say they were originally meant for an Australian Valiant, which would be an A-body but with steering box and column over on the other side, out of the way.
Quote:
Anyone have an idea on application?
Naw, they're for the approximately eighteen Slant-6 C-bodies sold in Canada! :lol:

Author:  Brussell [ Sat Mar 12, 2011 2:51 am ]
Post subject: 

From what I've seen I think they would fit in Ap5/6 and VC valiants for sure.

Author:  WhaleMstr [ Sat Mar 12, 2011 7:36 am ]
Post subject: 

I gotta van that if you wanted to send them this way - I could check and see how well they fit for ya!! LOL

dan

Author:  hantayo13 [ Sat Mar 12, 2011 11:15 am ]
Post subject: 

Looks like it time for you to build an old time dragster....slant power of course


keep on roddin'

Author:  DadTruck [ Sat Mar 12, 2011 6:33 pm ]
Post subject: 

Dude,, want to keep them or move them?,, I sent you a pm

regards
DT

Author:  SlantSixDan [ Sat Mar 12, 2011 10:34 pm ]
Post subject: 

I wanna move them. I was not anticipating the level of interest I've had. I have no idea what to price them at. Don't really want to put them on eBay. Not quite sure what to do! Will look to respond to all PMs shortly.

Author:  slantzilla [ Sun Mar 13, 2011 7:28 am ]
Post subject: 

I just had a set built that are very similar to that w/o the choke provisions. $300 would be a good starting poit. :D

Author:  wvenable [ Sun Mar 13, 2011 8:48 am ]
Post subject: 

Dan, if DadTruck is hot after these I am up in Michigan quite often. Could pick them up to save everyone shipping hassles. Let me know if this works out.

Author:  Doctor Dodge [ Sun Mar 13, 2011 9:10 am ]
Post subject: 

Quote:
You'd know better than I. What points of interference do you foresee? My notes from when I bought them say they were originally meant for an Australian Valiant, which would be an A-body but with steering box and column over on the other side, out of the way.
The way the collectors come straight down will put them right onto the LHD steering box.
And yes, I bet those would fit a RHD A-Body but our members down-under would have to confirm.
DD

Page 1 of 2 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/