These are on my shelf in Michigan. Don't know who made them, or when, but think it was back when the slant-6 was still a current-production engine. Don't know that I've ever seen a set of headers with provisions for a factory automatic choke (and provisions for a heat-tube type automatic choke, too). Don't know what I'm going to do with them; headers are against my religious beliefs.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Well, and this is just a thought...if they will work on my 1979 Plymouth Volare 225 super-six, you could give them to me at a great price......

Interesting....
Based on looks, those are not going to fit an A-Body car...
Anyone have an idea on application? Maybe a truck or van?
DD

Hmmmmmm.....I wonder if they'd fit a '23 T kit car project I have in storage...........

Roger

I allmost kinda like em.What size are the primeary tubes?They are strange,interesting,and very cuttable for my race car.Mark

There was a pair very similar to that on E-Bay a couple years ago. Nobody knew what they fit either.

Hooker used to make a truck header that looked kinda like that.

_________________
Official Cookie and Mater Tormentor.

You'd know better than I. What points of interference do you foresee? My notes from when I bought them say they were originally meant for an Australian Valiant, which would be an A-body but with steering box and column over on the other side, out of the way.
Naw, they're for the approximately eighteen Slant-6 C-bodies sold in Canada!

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

From what I've seen I think they would fit in Ap5/6 and VC valiants for sure.

I gotta van that if you wanted to send them this way - I could check and see how well they fit for ya!! LOL

dan

_________________
"I may be slow, but at least I'm not very fast!"
'69 A108 - 225, 727, 3.55, MSD6AL, a.k.a.-the brick

Looks like it time for you to build an old time dragster....slant power of course


keep on roddin'

Dude,, want to keep them or move them?,, I sent you a pm

regards
DT

I wanna move them. I was not anticipating the level of interest I've had. I have no idea what to price them at. Don't really want to put them on eBay. Not quite sure what to do! Will look to respond to all PMs shortly.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

I just had a set built that are very similar to that w/o the choke provisions. $300 would be a good starting poit.

_________________
Official Cookie and Mater Tormentor.

Dan, if DadTruck is hot after these I am up in Michigan quite often. Could pick them up to save everyone shipping hassles. Let me know if this works out.

_________________
66 Lil' Red Piggie Valiant (Mater Crusher) - Thanks Zilla!!!!! 72 Demon (Number 1 Son's)

The way the collectors come straight down will put them right onto the LHD steering box.
And yes, I bet those would fit a RHD A-Body but our members down-under would have to confirm.
DD