Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Tue Nov 17, 2026 4:56 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Shaker
PostPosted: Sat Mar 12, 2011 2:35 am 
Offline
EFI Slant 6

Joined: Sun May 23, 2010 8:38 pm
Posts: 454
Car Model:
Hi,

Has anyone ever had a shaker hood scoop setup on their slant 6?

If you are unsure what I mean look at this link:

http://en.wikipedia.org/wiki/Shaker_scoop

I was possibly thinking about it and wasn't sure wether it would be worth it, thinking maybe a 10 - 15 hp gain?

build:

1.7 1.44 valves, 500cfm 4bbl carb, long runners, high compression (around 9.5:1 or 10:1), port and polish job, elec ignition + bigger coil, and headders with 2.5" exhaust.


Top
   
 Post subject:
PostPosted: Sat Mar 12, 2011 6:22 am 
Offline
TBI Slant 6

Joined: Wed Jul 13, 2005 9:40 pm
Posts: 143
Location: Wisconsin
Car Model:
I'm no expert but I think any gains would be negligible.

I'm one for symmetry, so to me a shaker off to the side would look weird, but different is always good in my book - there's a few pics out there of slants with blowers sticking through the hood that look ok.


Top
   
 Post subject:
PostPosted: Sat Mar 12, 2011 7:09 am 
Offline
Turbo EFI

Joined: Sat Feb 19, 2005 9:57 am
Posts: 1818
Car Model:
would look kewel...might gain a few ponies @ over 80 mph or so

keep on roddin'


Top
   
 Post subject:
PostPosted: Sat Mar 12, 2011 9:31 am 
Offline
Turbo EFI
User avatar

Joined: Tue Jan 17, 2006 4:57 am
Posts: 1567
Location: Oslo, Norway
Car Model:
Bi Brussel.
The real high pressure buildup is along the windshield, so a rear-facing scoop or cowl induction would probably give more effect.

A low mounted hood scoop too far forward will in some cases end up in a local low-pressure zone. You can try to visualize the part of the air flowing up from the front of the car, making a curve starting at the edge of the hood, before straightening out, lowering some and then meeteing the windshield, where a pressure buildup happens. At the high point of that curve, the pressure under it is actually lower than above. A car built like a brick, with an edged or slightly lower hood front, will have a more pronounced effect, and placing the opening of the hood-scoop in that zone will not be a gain.

I know it may sound stupid, but make you own wind tunnel! Use a model car, or just a mock-up with some pieces of wood in the rough shape of a car, a fan of some sort and a cigarette or other smoke source. Try guessing beforehand how the flow around the car's body will be, and I guess you will be quite surprised at the real flow patterns! It is not a very scientific approach, but If nothing else, it's always fun to play with cars!

Olaf.

_________________
Aspenized


Top
   
 Post subject:
PostPosted: Sat Mar 12, 2011 6:25 pm 
Offline
EFI Slant 6

Joined: Sun May 23, 2010 8:38 pm
Posts: 454
Car Model:
Thank-you Olaf,
I was aware of some of those things but I'm inrested in the idea of cowl induction (have seen that a few times).

Doesn't sound stupid at all my friend has a fog machine and I'll test that out on my car, might even be able to improve some other areas of wind resistance. :/


Top
   
 Post subject:
PostPosted: Sun Mar 13, 2011 5:02 am 
Offline
Board Sponsor
User avatar

Joined: Sun Nov 03, 2002 9:55 pm
Posts: 576
Location: Gloucester, Va
Car Model:
http://s690.photobucket.com/albums/vv26 ... g&newest=1


Top
   
 Post subject:
PostPosted: Sun Mar 13, 2011 5:07 am 
Offline
EFI Slant 6

Joined: Sun May 23, 2010 8:38 pm
Posts: 454
Car Model:
Thanks, that's what I'm talking about!

Hopefully I'll be able to borrow the fog machine and take some photos in the next few days.


Top
   
 Post subject: Pic
PostPosted: Mon Mar 14, 2011 8:04 pm 
Offline
EFI Slant 6
User avatar

Joined: Sat Jan 17, 2009 1:58 pm
Posts: 487
Location: Crescent City, Ca
Car Model:
Will....

That is some work of art....Very Nice

_________________
BIG T
1967 Dart "Six Shooter"
Girlfriend Rhonda... 66 Valiant
Image[/URL]


Top
   
 Post subject:
PostPosted: Tue Mar 15, 2011 2:18 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 10443
Location: IRWIN PA
Car Model:
Quote:
http://s690.photobucket.com/albums/vv262/slant6racer/?action=view&current=i17053.jpg&newest=1
I thinks that is the car I kinda saw at Mason -Dixon I in 2010.. when it rained the whole weekend and My engine was puking water into the oil.


Wish i could have seen more of it.


Greg

_________________
http://www.youtube.com/hyperpack

Image


Top
   
 Post subject:
PostPosted: Tue Mar 15, 2011 2:39 pm 
Offline
Turbo EFI
User avatar

Joined: Tue Feb 18, 2003 7:34 am
Posts: 2479
Location: Lubbock, Texas
Car Model: 1964 Plymouth Valiant V200 Sedan
Lotus-Valiant with a Hyperpak! Who needs a scoop when the whole carb and air cleaner are out in the breeze?

Image

_________________
"When you find a big kettle of crazy, it's best not to stir it." - Pointy-haired Boss

1964 Valiant V200, 225/Pushbutton 904
BBD, CAI, HEI, LBP, AC, AM/FM/USB, EIEIO


Top
   
 Post subject:
PostPosted: Tue Mar 15, 2011 4:00 pm 
Offline
Turbo Slant 6
User avatar

Joined: Fri Jul 13, 2007 11:11 pm
Posts: 794
Location: clearwater florida
Car Model:
Well i used my snorkel hoodscoop on the duster to make my ram air fucntional but i had timeslips to prove i picked up a consistent tenth and a mph in the 1/8th mile for free by making it, it was ugly though i took it off at carshows but it worked.

Kev

_________________
Image


Top
   
 Post subject:
PostPosted: Tue Mar 15, 2011 5:21 pm 
Offline
Board Sponsor
User avatar

Joined: Sun Nov 03, 2002 9:55 pm
Posts: 576
Location: Gloucester, Va
Car Model:
Yea that is Stan about 10? years ago at Bristol. He did have the car at Mason Dixon. And yes you were busy that day.
Will


Top
   
 Post subject:
PostPosted: Tue Mar 15, 2011 6:07 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14979
Location: Park Forest, Illinoisy
Car Model: 78 Volare
They made an aftermarket shaker for Dakota's that was a little smaller than a factory unit. If you could find one of those it might be easier to fit. :D

_________________
Official Cookie and Mater Tormentor.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited