| Slant Six Forum https://slantsix.org/forum/ |
|
| Rocker Arm Choice https://slantsix.org/forum/viewtopic.php?t=44093 |
Page 1 of 1 |
| Author: | Dizzydean [ Fri Mar 18, 2011 2:06 pm ] |
| Post subject: | Rocker Arm Choice |
So I'm looking for my intake in the garage and I come across a valve cover with parts I thought I was missing like the rocker arm assembly etc... My question is I have 2 sets of rockers one steel (?) and the other what looks like bronze. Which is the preferable set? The bronze I believe came from a 70 and the other unknown but the valve cover had some red paint left in spots. |
|
| Author: | Joshie225 [ Fri Mar 18, 2011 2:30 pm ] |
| Post subject: | |
They are all steel. One just got colored by oil and contaminants. |
|
| Author: | Dizzydean [ Fri Mar 18, 2011 5:14 pm ] |
| Post subject: | |
Oops |
|
| Author: | slantzilla [ Fri Mar 18, 2011 5:16 pm ] |
| Post subject: | |
Use the ones that wobble the least on the shaft. Make sure to clean out all the oil holes through them too. |
|
| Author: | Dizzydean [ Fri Mar 18, 2011 10:23 pm ] |
| Post subject: | |
The set that I found hiding under the shelf looks almost brand new there that clean. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|