| Slant Six Forum https://slantsix.org/forum/ |
|
| Aftermarket Aluminum Cylinder Head? https://slantsix.org/forum/viewtopic.php?t=45109 |
Page 1 of 16 |
| Author: | Detroit Iron [ Wed May 25, 2011 10:18 am ] |
| Post subject: | Aftermarket Aluminum Cylinder Head? |
Does anyone know if there is an aftermarket aluminum cylinder head available for the Chrysler slant six engine? Maybe by Edelbrock or Offenhauser? Thanks! |
|
| Author: | Joshie225 [ Wed May 25, 2011 10:44 am ] |
| Post subject: | |
So it begins again. The answer is no. Nothing from another maker fits either. If you've got $30k or so you can get one going. |
|
| Author: | SlantSixDan [ Wed May 25, 2011 11:00 am ] |
| Post subject: | |
|
|
|
| Author: | walpolla [ Wed May 25, 2011 1:16 pm ] |
| Post subject: | Re: Aftermarket Aluminum Cylinder Head? |
Quote: Does anyone know if there is an aftermarket aluminum cylinder head available for the Chrysler slant six engine? Maybe by Edelbrock or Offenhauser? Thanks!
A great big NO !  This has been discussed to death on here and other Mopar sites. Once again no. regards,Rod 
|
|
| Author: | slantzilla [ Wed May 25, 2011 2:23 pm ] |
| Post subject: | |
I know sumthin' you guys don't know, and I'm not tellin'. 
|
|
| Author: | DadTruck [ Wed May 25, 2011 2:43 pm ] |
| Post subject: | |
Oh No,, Wayne,, did you tell Zilla about the cyl head!!! |
|
| Author: | wvenable [ Wed May 25, 2011 2:49 pm ] |
| Post subject: | |
I did not say a dang thing! My word is good - exept when I've had a few! |
|
| Author: | DadTruck [ Wed May 25, 2011 3:00 pm ] |
| Post subject: | |
that works well,, ,, found the more we put away the more feasible that project becomes,,, and won't have to bring any extra for Zilla! |
|
| Author: | Ron Parker [ Wed May 25, 2011 3:01 pm ] |
| Post subject: | |
I know too Bagel seen photos. Thanks Possum  It wasnt over when the Bagel got fryed and it aint over now because It Aint Over Until I Win |
|
| Author: | GTS225 [ Thu May 26, 2011 6:32 pm ] |
| Post subject: | |
 ??? Roger |
|
| Author: | slantzilla [ Fri May 27, 2011 5:14 am ] |
| Post subject: | |
If Possum tells you I have to kill you, then him, then commit suicide. 
|
|
| Author: | wjajr [ Fri May 27, 2011 5:26 am ] |
| Post subject: | |
Zilla: [quote]then commit suicide.[/quote] Not in the head… This is a vicious circle, somehow oddly connected to that “Sixties Beer†thread started a while back. |
|
| Author: | slantzilla [ Fri May 27, 2011 5:36 am ] |
| Post subject: | |
| Author: | DAlexanderW [ Fri May 27, 2011 6:10 am ] |
| Post subject: | |
Is anyone on here serious about a new Cylinder head or are you all just blowing smoke? I read it costs 30 grand? I've got about 5-10 K put away.... anyone else want to go in on this? |
|
| Author: | DadTruck [ Fri May 27, 2011 6:17 am ] |
| Post subject: | |
I think I can save you some $ here,, just send to me half or 5K,, and you will still have 5K,, so you will at least break even on the deal. |
|
| Page 1 of 16 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|