The engine is stock bottom end, ..060 over bore,1.74 intake valves,1.44 exhaust, light porting and a comp cam. Its turbo is a t3 and it is intercooled.
208 hp and 313 tq at the wheels. 8 psi
The pics are in the drag strip sect
Andrew Wagner
| Slant Six Forum https://slantsix.org/forum/ |
|
| dyno results https://slantsix.org/forum/viewtopic.php?t=4526 |
Page 1 of 1 |
| Author: | andrew [ Sun Nov 24, 2002 6:32 am ] |
| Post subject: | dyno results |
The engine is stock bottom end, ..060 over bore,1.74 intake valves,1.44 exhaust, light porting and a comp cam. Its turbo is a t3 and it is intercooled. 208 hp and 313 tq at the wheels. 8 psi The pics are in the drag strip sect Andrew Wagner
|
|
| Author: | slantzilla [ Sun Nov 24, 2002 11:36 am ] |
| Post subject: | |
Those are some pretty good numbers Andrew!  Did you ever get it back out to the dragstrip yet? 
|
|
| Author: | Bob D [ Sun Nov 24, 2002 4:24 pm ] |
| Post subject: | |
Hey Andrew that's great. At what RPM were these numbers taken? Anyone have any idea what that would translate to in terms of engine HP? I believe Andrew has a standard transmission. |
|
| Author: | slantzilla [ Sun Nov 24, 2002 5:09 pm ] |
| Post subject: | |
I believe standard loss is figured at around 18%. That would put Andrew right around 250 or so at the crank.
|
|
| Author: | andrew [ Sun Nov 24, 2002 10:17 pm ] |
| Post subject: | dyno |
the peak tq was at 3000 rpm and the peak hp was at 4000 rpm. I can't get to the drag strip until the end of winter. Andrew wagner 
|
|
| Author: | 72Duster [ Wed Nov 27, 2002 11:06 am ] |
| Post subject: | |
Great results andrew ! What kind of head gasket do you use ? Christian |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|