| Slant Six Forum https://slantsix.org/forum/ |
|
| Fried Parking Brake! https://slantsix.org/forum/viewtopic.php?t=45293 |
Page 1 of 1 |
| Author: | mullskull [ Sun Jun 12, 2011 5:02 pm ] |
| Post subject: | Fried Parking Brake! |
a friend has 1964 Dodge D100 2x4 truck.. it has the parking brake running off the back of the trans- it was used with the parking brake on..needless to say the parking brake is fried! i took a look to where the noise was coming from.. there was a bunch of spring material sticking out from the drum- i opened the inspection plate and pulled out a handful of broken metal..(looks like 3/16 spring steel) i have never taken one of these apart.. (and no manual).. i need to order parts.. so far i have only been able to find bands and a cable, no hardware..... any suggestions? rich |
|
| Author: | Reed [ Sun Jun 12, 2011 5:14 pm ] |
| Post subject: | |
http://seattle.craigslist.org/skc/pts/2429637921.html |
|
| Author: | mullskull [ Sun Jun 12, 2011 8:48 pm ] |
| Post subject: | |
Dang! i should have mentioned.. the truck is an automatic..push button- |
|
| Author: | SlantSixDan [ Sun Jun 12, 2011 10:08 pm ] |
| Post subject: | |
www.oldmoparts.com |
|
| Author: | mullskull [ Sun Jun 12, 2011 10:20 pm ] |
| Post subject: | |
thanks- |
|
| Author: | zorg [ Mon Jun 13, 2011 8:25 pm ] |
| Post subject: | |
I'd have to check, but I don't think I have a FSM old enough for what you're working on. However, someone on the forums over at www.sweptline.org could probably scan a few pages of a manual if you're still needing more detail/info. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|