| Slant Six Forum https://slantsix.org/forum/ |
|
| New Ride!!! 1969 Dart Custom https://slantsix.org/forum/viewtopic.php?t=45838 |
Page 1 of 1 |
| Author: | raPoM [ Thu Aug 04, 2011 4:12 pm ] |
| Post subject: | New Ride!!! 1969 Dart Custom |
 Just picked this up for 500 today. 69 Dart,225,904,factory a/c,10 in drums,and its 95% rust free. It just needs a small patch on the drivers side lower 1/4,everything else is solid.It also needs a new front bench as the PO dog ate the one thats in it  ,its just a frame with headrests! I have been without a mopar for almost 2 years now,and it feels good to be back in the game.
|
|
| Author: | Dart270 [ Thu Aug 04, 2011 6:57 pm ] |
| Post subject: | |
Congrats on a nice ride for a good price... Lou |
|
| Author: | raPoM [ Thu Aug 04, 2011 8:07 pm ] |
| Post subject: | |
Thanks Lou,although the car is not as nice as the picture above makes it look. I had to throw away the front seat,and the engine wiring harness has been hacked to pieces,and the car is not currently running. Im thinking about trying to find a complete harness so I can "start over". Someone tried to ad electronic ignition,and failed horribly. |
|
| Author: | raPoM [ Sun Aug 28, 2011 2:37 pm ] |
| Post subject: | |
Its comming together. Got some buckets out of a 97 camaro  I know I know,but they were cheap,and a good fit. I got the HEI installed,and the carb rebuilt and she runs! Major exhaust leak at the flange,broken bolt,having a rough time getting the other one to come out/break. Found a new carpet set for 70 bux,and got all the parts ordered for my scarebird disc brake conversion.I removed the a/c and heater box,should be nice and light now. That stuff had to weigh 100 lbs Just going to cover the firewall holes.I was able to sell a lot of unneeded stuff from the Dart. I have made 240 bux back from the car. I only paid 500 for the car,and 80 to have it towed. I am hoping to have a nice driver for under 1000 when all is said and done. Jared |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|