| Slant Six Forum https://slantsix.org/forum/ |
|
| starter positive bolt. https://slantsix.org/forum/viewtopic.php?t=45968 |
Page 1 of 1 |
| Author: | exoJjL [ Mon Aug 15, 2011 3:36 pm ] |
| Post subject: | starter positive bolt. |
Does anyone know if I can replace just the positive bolt on my starter. Damn thing broke off but the starter is good. |
|
| Author: | exoJjL [ Mon Aug 15, 2011 4:06 pm ] |
| Post subject: | |
I have to replace the starter solenoid don't I? http://info.rockauto.com/getimage/getim ... /CR482.jpg |
|
| Author: | SlantSixDan [ Mon Aug 15, 2011 6:55 pm ] |
| Post subject: | |
WAI/Transpo number 76-3550 for that positive stud. Bet you will find other worn parts inside the starter when you open it up to replace the stud. You could get a brand-new genuine Chrysler starter from Old Car Parts Northwest… |
|
| Author: | exoJjL [ Tue Aug 16, 2011 12:10 am ] |
| Post subject: | |
might look into that although this starter was bought new and used for about a year before the car's been sitting and she's been sitting for 3 years. So I would think it's still a good starter. It is a re-manufacture from Schucks. As a matter of fact I started it a few weekends ago. |
|
| Author: | exoJjL [ Tue Aug 16, 2011 12:16 am ] |
| Post subject: | |
Come to think of it I live less than 30 minutes from Kent so I can drive down there and pick the parts up. Save a little on shipping. |
|
| Author: | SlantSixDan [ Tue Aug 16, 2011 6:29 am ] |
| Post subject: | |
Yup, "reman" = garbage. Get a new one and never have to think about it again. Call Ray first (206-300-1083) to make sure he's there and get directions to the new location. He's got new alternators, too. Tell him Dan Stern sent you. |
|
| Author: | exoJjL [ Tue Aug 16, 2011 1:27 pm ] |
| Post subject: | |
Alright Dan. Thank you. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|