| Slant Six Forum https://slantsix.org/forum/ |
|
| Cylinder Head Dowel Pins https://slantsix.org/forum/viewtopic.php?t=46458 |
Page 1 of 1 |
| Author: | bwhitejr [ Tue Sep 27, 2011 4:55 am ] |
| Post subject: | Cylinder Head Dowel Pins |
My machinist is 25 miles away and I don't want to have to drive there and back to get the cylinder head dowel pins he took out of my head. Do any of the auto parts stores carry them or do I need to drive over and get min e back? thanks, bwhitejr |
|
| Author: | DusterIdiot [ Tue Sep 27, 2011 5:37 am ] |
| Post subject: | Yep... |
NAPA either has them or carries them in their fastener bins....it's the same part number as the dowel pins for the Chevy Vega 4 cylinder if the parts counter guy doesn't speak mopar... -D.Idiot |
|
| Author: | Dart270 [ Tue Sep 27, 2011 8:50 am ] |
| Post subject: | |
Just buy some 1/4" steel rod at hdwr store and cut to length... Lou |
|
| Author: | slantzilla [ Tue Sep 27, 2011 2:22 pm ] |
| Post subject: | |
I have cut the unthreaded part out of a long 1/4" bolt too. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|